Click to enlarge, hover over image to zoom

Dicor White Rubber Roof Acrylic Coating, Gallon

(18 Reviews) Add A Review
Catalog Item # 32151
This Item is In-Stock and Ready to Ship
Internet SALE 
$73.17 SAVE $31.83

Reg $105.00

Have A Question About This Product?
17 Questions | 19 Answers
Read All Q&A | Ask a Question | Answer a Question

Like this product?
Share it!

Add Camping World item to Wish List

Description


Elastomer coating provides superior weather and UV resistance, flexibility, adhesion and ease of application.
Excellent protective elastomeric barrier for extending the life of your rubber roof membrane. Fire retardant.The Dicor Rubber Roof Coating System is a two part, commercial grade system from Carlisle Syntec that combines a primer/cleaner necessary for proper roof preparation and an acrylic coating that provides an excellent protective barrier.

Application:

White acrylic coating must be preceded with Dicor cleaner/activator to ensure proper adhesion. All cleaner/activator must be completely removed from roof prior to applying acrylic coating. All surfaces must be clean and free of residue or loose particles, degraded substrate, grease, oil, dirt, or other contaminates. Surfaces shall be completely dry and frostfree before coating. Deteriorated or damaged substrates shall be repaired or replaced.

Dicor acrylic coating shall be applied in a minimum of 2 coats at a rate of 1 gallon per 125 sq. ft per coat (i.e. 8' X 30' roof takes 4 gallons). Actual gallons required will depend on the type of surface and texture, method of application, and weather conditions at the time of application. All surfaces must be uniformly coated and free from voids, pinholes, or blisters.

Preparation:

Thoroughly mix the contents for a minimum of 15 minutes prior to application. Dicor acrylic coating may be applied by medium nap roller or brush. Clean equipment with water and a universal cleaner.

Caution:

CAN CAUSE IRRITATION OF NOSE, THROAT AND LUNGS; CAN CAUSE NAUSEA AND HEADACHE. Prolonged or repeated breathing of vapor or spray mist may be harmful. Use a respirator for protection from vapor or spray mist. Avoid eye and skin contact. Do not take internally. Wash thoroughly after handling and before eating or smoking. Keep container closed when not in use.

Contains:

Aqueous Acrylic Emulsions, Calcium Carbonate (471-34-1), Aluminum Trihydroxide (1645-51-2), Titanium Dioxide (13463-67-7)

KEEP FROM FREEZING • USE ONLY IN A WELL VENTILATED AREA




Technical Specs


Tech Specs

Weight: 12.1 lbs.

Manufacturer: Dicor Corp

Mfg Part #: RP-CRC-1

Tech Notes: Covers approximately 125 square feet per gallon.



Related Items


Items Selected: (0)


Reviews


Dicor White Rubber Roof Acrylic Coating, Gallon: Customer Reviews

Camper's Choice Rating

(5 Based on 18 Reviews)

Reviewed by 18 customers

By

Dicor Acrylic Coating


0 out of 0 people found this review helpful.
October 09, 2014
The acrylic coating worked great! I used 3 quarts of the coating primer cleaner and 2 gallons of the Acrylic coating. The only problem is I ordered 4 gallons for my 32' camper which is too much! That is what it was calling for by Dicor for a 30' camper! The plastic gave me the most problems! Keeping it taped on the top was a real headache! Not sure what the solution to the plastic staying taped but should I even try this again I will use duct tape next time. Not sure what to do with 2 gallons of acrylic coating? Does anyone have any suggestions on plastic staying taped?
Was this review helpful? Yes / No
By

Great stuff, goes on easy, seems to work well.


0 out of 0 people found this review helpful.
June 24, 2012
I have only had this on my roof now for two weeks and the hardest part was prepping the sides of the RV with dropcloth for the activator cleaner. So far so good. The stuff goes on smooth and easy like a thick paint and dries fairly quickly. Allow a full day for this job- as I said the prepping was the hardest part. The description is a bit off for how much you need, however. I have a 32' x 8.5' Class A and I only needed a little over 2 gallons for two coats. I bought 4 gallons as I was told in the description. It does one no good to overcoat or have three coats so I just did the two and gave the rest to my friend who is doing his RV soon, We'll see how it lasts, but for now it looks and works great.
Was this review helpful? Yes / No


Q & A



Product Question & Answer

17 questions : 19 answers
Expand All
how often should you coat the roof
1 answer(s)
Can this coating be applied to a roof that has Eterna bond tape/patch on it?
1 answer(s)
can this be used on both types of rubber roofs?
1 answer(s)
can this product be used on a rubber roof that has weathered down to the black surface?
2 answer(s)
can this coating be applied as waterproofing, uv resistance, and abrasion resistance to other types of surfaces, namely a plant based smooth surface?
1 answer(s)
Is there any warranty with this product?
1 answer(s)
Do I need to use primer with Dicor Roof Acrylic?
1 answer(s)
How long can the product be stored before use (Shelf Life)?
1 answer(s)
Can I apply a third coat after 24 hours?
1 answer(s)
Does this product come in half gallons?
1 answer(s)
Can this product be used on a Britek roof?
1 answer(s)
At coverage rate of 125sqft per gal, min. of two coats,is that saying for 8x34ft roof I need 2.17 gals or 4.34 gals?
2 answer(s)
How much area does 1 gallon cover?
1 answer(s)
What is the name of the 'cleaner/activater'?
1 answer(s)
Can you do slides with this product as well?
1 answer(s)
Can I wait 24 hours between step 1 and step 2 for application?
1 answer(s)
What is the approximate drying time?
1 answer(s)




Stay Connected
See Camping World Reviews at Bizrate.com