Easy to install. If two drawers are desired (as shown in picture) then you must order 2 units.

I have a 18 foot travel trailer and believe me space is a premium. This product is perfect for just that reason.. Even if it is just for stashing little things such as playing cards or a remote control for the tv set.. I would say it is a great buy..

This is by far my favorite addition to my camper! These were very easy to install. I put 2 of them in. There is plenty of clearance between the shelf and the seat so sitting down at the dinette is no problem. Hats off to whom ever came up with this idea!

As another person noted, it would have been desirable to have gotten my two drawers on sale. The picture shows two drawers side-by-side but you must buy two to get two; they don't come as a pair. Mounting a drawer is simple, requiring a drill motor, a 1/8- or 3/16-inch drill bit, and a No. 2 or 3 Phillips screwdriver. The left and right drawer glides are held snugly to the drawer with rubber bands, and after positioning the assembly, the predrilled holes in the glides serve as a template for drilling pilot holes for the wood screws. CAUTION: Be carefull to not drill all the way through the table. Extra caution is required when the table has a hollow core. Remove the rubber bands, affix assembly with screws, and you are finished. If the drawer(s) are too hard to slide, loosen screws slightly, move drawer out and in, then retighten screws. The glides allow two drawer positions: up almost touching the table; or dropped to the lower channel in the glide. The drawer top in the lower position clears the table by 1 in.

Much to my chagrin, I should have waited 3-4 weeks since the price recently dropped on these items. Due to clearance problems with the folding leg on my solid oak table, it's necessary to cut back a portion of the inside mounting bracket frame, which results in using only three out of the four mounting holes offered. This may also include trimming back the first two triangular cross stiffening areas on the inside bracket as well. A helpful tip is to use a strip of double-sided foam tape (not included) to assist in the positioning and soft mounting of the brackets for final fit test with the drawer. It also helps in offsetting the brackets prior to drilling the holes for the mounting screws, which can wind up being too long for some tables, and result in poking out through the finished side of the table if you're not careful with your measuring.

We have been looking for places to store extra things and this sure fits the bill. Works great and a snap to install, would recomend it to anyone.