VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
2.5 Gallon VIAIR Air Tank
450C VIAIR Compressor
35ft. Coil Hose with Tire Chuck
Dash Panel Gauge with ON/OFF Switch
Pressure Switch with Relay (110 PSI on, 145 PSI off)
Reducer: 1/8” (F) to 1/4” (M)
1/4” Quick Connect Stud (F)
1/4” Quick Connect Coupler (F)
1/4” 175 PSI Safety Valve
1/4” Drain Cock
(3) 1/4” Compression Fittings
20ft. 12-Gauge Wire with Inline Fuse Holder
4” Strip of Continuous Grommet Material
All Fittings are NPT rated unless otherwise noted.
Mfg Part #:
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI
Max. Working Pressure: 150 PSI
Max. Amp Draw: 23 Amps
Ask your question today to get answers from other owners of this product and Camping World staff members. If you have a question for customer service such as pricing, shipping or order information please do not submit your question through this form.