Protect your awning roller tube from bending.
Awning Cradle Support mounts on RV beneath center of roller tube, which slides into place with pivot-and-lift action. Works on any brand of automatic roll-up awning with a roller tube. Includes aluminum backing plate and screws. USA.
NOTE: When using two Cradle Supports, divide awning length into three equal parts.
Less than 1 lb.
Cradle is 4 1/2"L x 1 3/8"W
Extends 4 1/2" from side of RV
Backing plate is 4" x 5"
Mfg Part #: