20 lb Heavy Duty Propane Tank Cover, Polar White
Item No. 49349
20 lb Heavy Duty Propane Tank Cover, Polar White is rated
out of
5 by
21.
Images
Details
https://www.campingworld.com/20-lb-heavy-duty-propane-tank-cover-polar-white-49349.html
20 lb Heavy Duty Propane Tank Cover, Polar White
$28.99
$32.99
Save $4.00
(
12% Off
)
Additional Information
Features
Heavy duty polyethylene covers protect propane gas bottles from flying debris while streamlining the look of your rig.
Slip the custom molded, assembled unit over bottles for a safe, secure fit and UV protection against sun damage. Updated design provides easier access to gas valves.
Note: Shown in polar white. For dual tanks.
Show moreShow less
Slip the custom molded, assembled unit over bottles for a safe, secure fit and UV protection against sun damage. Updated design provides easier access to gas valves.
Note: Shown in polar white. For dual tanks.
Specs
| Color | White |
|---|---|
| Unit Weight | 5.00 lb |
| Brand | Camco |
| MFG Part No. | 40523 |
Reviews
Rated 5 out of
5
by
Dale Galloway from
20 lb Heavy Duty Propane Tank Cover - Polar White
If you need to add or replace your tank cover, I recommend this product. It's a perfect fit and the part I like is the door on top of the cover that will give you access to the bottle valves to open and close or switch the bottles should run out of propane when you don't have a automatic switch over. Great product for the money.
Date published: 2012-09-24
Rated 3 out of
5
by
Paul Persson from
Tank cover
They are light weight and do not come with anything too tie it down with. I have tried short bungee cords but they don't hold it tight enough If I wire it I will not be able to remove it easily. I am using the shortest bungee cords available. I may try tying a knot in the middle of the bungee cord to see if that helps.
Date published: 2012-03-23
Rated 4 out of
5
by
Anonymous from
Propane Tank Cover
This propane tank cover is just as described. Made of heavy plastic, fits over the bottles
perfectly. Goes together easily. Looks great.
Only thing to make it perfect is to include the right size bungee strap to secure the tank
cover at the bottom. It's been difficult to find just the right size bungee.
Date published: 2012-06-15
Rated 4 out of
5
by
I love the outdoors from
Good product
We are new to RVing so we ordered the wrong cover and found out the hard way. This
cover isn't made for campers with a power tongue jack. We had to replace it with a vinyl
one. The product itself was sturdy and we were disappointed we had to go with vinyl.
Date published: 2014-04-14
Rated 5 out of
5
by
Mark Hassler from
EXCELLENT product !!!
Worked perfectly..heavy plastic..did not interfere w / sway
control..well made..slight mod to rear allowed for super
tight install...used small dia. bungee for tie down
bottom...painted to match w / rustoleum enamel...100% happy
w / purchase.
Date published: 2013-12-22
Rated 4 out of
5
by
Anonymous from
Good but needs assembled.
This is a solid tank cover that comes with two half's
stacked. Takes about 15 minutes to
assemble. Looks like it will stay clean longer than the
fabric cover I bought 5 weeks ago that molded and
black-spotted really fast.
Date published: 2014-07-19
Rated 4 out of
5
by
Camper101 from
Good product except for all the bolts.
This is a good product, however they should design it to open the same way the top
cover does. Every time you need to refill the tanks you have to completely dismantle it
by removing all the bolts.
Date published: 2013-11-20
Rated 5 out of
5
by
Anonymous from
Good value
Easy to assemble and install. You can access the tank valves easily with this product. I
did have to notch it in order to work properly with my load equalizer hitch.
Date published: 2011-09-29
Q & A
How does it secure at the bottom.
The bottom has molded tabs with a drilled out hole in the center. A bungee cord(not included) is hooked in these tabs to secure the cover in place.
Date published: 2019-05-28
Is this available for single tanks?
No, the heavy duty propane tank covers by Camco is not available in a single tank variation.
Date published: 2019-03-08
Are there cutouts to allow for the propane hose?
No, the cover encloses the propane bottles except at the bottom. Hoses would have to be removed to secure the access lid.
Date published: 2019-03-08
does this cover come in single size?
No, these heavy duty covers by Camco only come in a double tank format for 20# or 30# steel tanks in various colors.
Date published: 2019-03-08
What are the dementions of this cover?
The dimensions are: 17.5"H X 20.44"D X 31.19"W
Date published: 2019-03-08
Can this cover be used for a single tank?
This can be used for a single tank, although it is designed for use with two tanks.
Date published: 2019-03-08
Does this cover 2 - 10 lb tanks, or 2 - 20 lb tanks?
This cover is for two 20 pound tanks, such as item 56054.
Date published: 2019-03-08
Will this fit over 2, 7.5 gal. tanks?
No, this is for the smaller (20 lb, 4.7 gallon) tanks. See item 23659 for the larger size.
Date published: 2019-03-08