Adjustable EZ Hose Carrier, 50-94"L, Black
Item No. 630077
Adjustable EZ Hose Carrier is rated
out of
5 by
231.
Images
Details
https://www.campingworld.com/adjustable-ez-hose-carrier-50-94l-black-104634.html
Adjustable EZ Hose Carrier, 50-94"L, Black
$55.49
$73.99
Save $18.50
(
25% Off
)
Variations
-
1. 4' - 8'
-
2. Select Color Black
Additional Information
Features
Adjustable EZ Hose Carrier can adjust from 50" to 94"
Show moreShow less
- Easily adjustable – adapts to best mounting location and hose size
- Mounting brackets and screws included for easy installation
- Hinged door cap with a twist latch closure at each end
- Add a padlock for extra security!
Specs
| Unit Weight | 6.45 lb |
|---|---|
| Brand | Valterra |
| MFG Part No. | A04-5094BK |
Reviews
Q & A
Adjustable EZ Hose Carrier can adjust from 50" to 94"
Show moreShow less
- Easily adjustable – adapts to best mounting location and hose size
- Mounting brackets and screws included for easy installation
- Hinged door cap with a twist latch closure at each end
- Add a padlock for extra security!
| Unit Weight | 6.45 lb |
|---|---|
| Brand | Valterra |
| MFG Part No. | A04-5094BK |
Rated 1 out of
5
by
Dean from
Very low quality
Bought this product and the second time I open the door to pull the hose out the door just fell off to the ground. The hinges on the door are rediculas cheap poor quality. I seen you can order a new door but why. You can buy a 10’ drain and waste pvc pipe at home improvement store and a cap for one end and an adapter and threaded plug way cheaper. The drain and waste pipe is the same gauge pipe as this is and just cut to length. You can find the mounting clamps in steel or pvc that goes around the pipe to mount it the same way. Buy 3” or 4” diameter pipe just get the thin wall like Valtera uses to reduce weight. Will last far longer than this product and will be sealed tight or drill some holes if you want vents to dry.
Date published: 2020-10-09
Rated 5 out of
5
by
Butch in Nevada from
E-Z Hose carrier
Great addition for carrying your primary waste hose. No rust or metal abrasion issues either. Does accommodate Rhino-Flex hoses without issue. Now use the stock bumper hose storage for the less used length extension hoses. A little thought and the carriers (this is the 64 model) can be attached in various positions. Do not find this to be a problem for anyone handy with hand tools.
Date published: 2013-04-04
Rated 3 out of
5
by
EJ Cruz from
OK - but no RhinoFLEX without modification.
I need to shave a 1/4 or so off the ears of my RhinoFlex
hose to get it in here. Is that easier than building one
from scratch? I'd say yes. One of my end caps locks in
very positively, the other one - not so much. Even at the
listed price, I think I'm still ahead - but not by much.
Who is going to finally make a holder that retains the
adapter as well?
Date published: 2008-04-19
Rated 4 out of
5
by
Chuck Derry from
Decent quality
I really like the concept, and it is much easier than building my own out of PVC pipe, but, several things bothered me. Not sure how well it will hold mounted on the bottom of the bumper, which would make the logo right side up and the door locks stay closed with gravity. I may try mounting it with U-bolts to avoid drilling holes. Maybe I'm missing something, like instructions. It seems like a quality product, just missing a few things that would make it so much better.
Date published: 2017-09-10
Rated 1 out of
5
by
Mikey from
Sewer Hose Carrier
I liked the idea of clearing out space in the basement of my trailer and storing the hose underneath, however I found the carrier to be of poor quality over all. One mounting bracket (plastic) broke in shipping, if that happened how long would it last bouncing around under my trailer? The mounting brackets were permanently attached and could not be adjusted to where I could use them.
Date published: 2019-09-24
Rated 5 out of
5
by
Anonymous from
Works great for my Rhino Flex kit
Based on Herb and Anonymous answers, I didn't buy for a year. I went and measured my Rhino-Flex and saw that the widest portion was the 90 degree milk white swivel at 4.25". Bought this, my Rhino Flex fits perfectly, easy to insert and remove. The only part I have to remove is my 90 degree clear connection for the RV. Of course, the sewer attachment won't fit, but every portion that is contained by the Rhino Flex caps fits perfectly with caps on. I do recommend the 64" for the 20' kit.
Date published: 2015-09-03
Rated 5 out of
5
by
Ralph Elver from
Easy & Light
I've used these hose carriers for years on several different rvs. The plastic tubes are light and the end brackets make them easy to install. They are lighter than using 4 inch PVC, and the caps on the ends work much better than using standard screw plugs. They are a good value, work exactly as advertised and are too easy to install not to use.
Date published: 2004-07-25
Rated 3 out of
5
by
Siballs from
EZ, not so easy.
Good concept, not so good quality. Had to glue one end piece back on right out of the box. Sheet metal screws are fine but not good for mounting on square tube bumper, had to make ubolts from quarter inch ready rod and make alluminum plates to sit under the plastic mounts to support them
Date published: 2019-10-16
I lost one of the end caps it blew off the first time I used it. Can I buy a replacement
I have not seen any replacement end caps for this product.
Date published: 2021-09-13
If I extend this tube out all of the way on the 4' to 8' size, what would the mounting bracket center to center spacing be? What is the product made out of?
About 4', I would not extend it all the way to the MAX. Keep it back at least 4" from the max length. The tubing is made of a good plastic like ABS.
Date published: 2021-07-19
How do you get the end cap off. My new RV (first time RVer) has one mounted to the bottom of the trailer but I'll be a monkeys uncle if I can get the end cap off. Do you pry it off or what?? Thanks
The one I received had a hinged end cap with a swivel cam latch incorporated into it. In order to secure it in the closed position (so it doesn’t flap open and shut) the cam latch rotates underneath a tab molded onto the end of the tube and resulting pressure holds the two pieces together. I simply rotate the swivel cam to the open position and it releases pressure and the cap swings freely open.
Date published: 2021-06-15
what is the inside diameter i have a rhino hose i need 5inch id
Interior diameter is 4-1/2"
Date published: 2021-07-19
Can the 4'-6' accommodate a 20' hose?
Ideally the hose should be measured to verify fit in the carrier. Due to various material thickness, types, and end connectors the collapsed sized can differ.
As an example, Camco's 20 ft. heavy duty sewer hose(SKU#20468) made of 15mil, HTS vinyl will collapse to 32". While a shorter 10 ft. length of RinoFlex(SKU# 21580), which is 23 mils of polyolefin, will collapse to the same size of 32".
Date published: 2020-03-13
How do you attach this to the rear bumper of a class c motorhome? What materials will I need?
Each end of the carrier has a bracket with two mount holes. Pilot holes will need to be drilled in the bumper for these mount holes, and the included screws are used to fasten the carrier to the bumper. So you will just need to supply your own tools while no additional materials for installation are necessary.
Date published: 2019-04-12
Exactly where do you install this carrier ??
Most RV'ers mount this on the bottom of the RV. The bumper is also a very common installation location.
Date published: 2019-05-07
What is the internal diameter of this product?
Interior diameter is 4-1/2".
Date published: 2021-08-28