Ancor Adhesive-Lined Heat Shrink Tubing Kit, 20 - 2/0 AWG, 3/16"-3/4" dia., 6" L
Item No. 350306
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 52ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Images
Ancor Adhesive-Lined Heat Shrink Tubing Kit, 20 - 2/0 AWG, 3/16"-3/4" dia., 6" L
Details

Ancor Adhesive-Lined Heat Shrink Tubing Kit, 20 - 2/0 AWG, 3/16"-3/4" dia., 6" L

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 40ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Item No. 350306
$8.83 $19.99
Save $11.16 ( 56% Off )
Product Actions

This item is currently not available.

Additional Information
The Ancor Adhesive-Lined Heat Shrink Tubing Kit includes an assortment of 3/16", 1/4", 3/8", 1/2", and 3/4" tubing. Cross Linked polyolefin tubing is significantly stronger than PVC tubing and won't burn like PVC. The heat-activated adhesive lining shrinks at 257° F (125° C) to provide an impervious seal against salt water, oil, acids, and sunlight, as well as providing strain relief. Ancor Adhesive-Lined Heat Shrink Tubing provides the highest shrink ratio you'll find anywhere, shrinking down to a third of its original size. Operating temperature range: -40° F to 230° F (-40° C to 110° C). UL 224. Eight tubes per pack. Black.
Show moreShow less
  • Includes an assortment of 3/16" to 3/4" tubing
  • Cross Linked tubing is much stronger than PVC
  • Polyolefin tubing won't burn like PVC
  • Seals out salt water, oil, acids, and sunlight
  • Tubing shrinks down to a third of its size
Unit Weight 0.10 lb
Brand Ancor Wire and Cable
WARNING: Cancer and Reproductive Harm For more information, go to www.P65Warnings.ca.gov/product.
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getReviews, 38ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getContent, 63ms
  • questions, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};