Anode Rod for Suburban Water Heaters – Aluminum
Item No. 18414
Anode Rod for Suburban Water Heaters – Aluminum is rated
out of
5 by
21.
Images
Details
https://www.campingworld.com/anode-rod-for-suburban-water-heaters-%E2%80%93-aluminum-18414.html
Anode Rod for Suburban Water Heaters – Aluminum
$12.06
$16.29
Save $4.23
(
26% Off
)
Additional Information
Features
Extend the life and efficiency of your RV's water heater with a replaceable anode rod made specifically for suburban water heaters. Remove the plastic drain plug and insert the anode rod. When replacement is necessary, unscrew the old one and insert the new one. Anode rods are easily replaced and should be checked every three months.
Show moreShow less
- Made of aluminum
- 0.75" dia. x 9-1/2"L
Specs
| Unit Weight | 0.54 lb |
|---|---|
| Brand | Camco |
| MFG Part No. | 11563 |
Reviews
Rated 4 out of
5
by
Daniel R. from
Online Confusion
This was the correct part for my Travel Trailor and looks to be as good or better than
original part. The online catalog offers two options making it very confusing to
determine whether one or the other is correct. Use the size discripion. assuming you
have the original part out of the water heater, to determine which you need.
Date published: 2013-05-08
Rated 5 out of
5
by
steven skipchak from
ANOD ROD
HAVE USED THIS PRODUCT FOR SEVERAL YEARS AND WE
CHANGE EACH FALL, AND YOU CANNOT EVEN BELIEVE ALL THE
MINERALS THAT ARE ATTACHED TO THE ROD. WE HAVE A
PERMANENT SITE SO ONLY DRAIN WATER HEATER IN FALL, AND
THIS PRODUCT IS GREAT, CHANGE ONCE A YEAR FOR BEST
RESULTS, DEPENDING ON YOUR WATER QUALITY.
Date published: 2008-04-09
Rated 5 out of
5
by
S. Fischer from
Anode for Suburban Water Heaters
The true socket size to remove the drain plug on the Suburban water heater is 1 1/16 inch. After only one season of use, I noticed that the anode was about 1/2 used up and there was a lot of sediment on the remaining anode. Would suggest checking and replacing as needed to save an expensive tank.
Date published: 2004-12-03
Rated 5 out of
5
by
Pam Overmyer from
GREAT PRODUCT I DIDN'T KNOW EXISTED
I'M GLAD I FOUND THESE. I EMPTIED OUT MY WATER HEATER FOR WINTERIZING AND FOUND THIS TERRIBLY CORRODED ROD AND LOTS OF SEDIMENT IN MY TANK. I DIDN'T REALIZE THESE EXISTED! THESE SIZE OF THE OUTSIDE CAP SAYS 7/8 INCH, BUT I USED 1 1/8 INCH AND WAD A GOOD FIT. GET 2 AND HAVE A SPARE.
Date published: 2004-01-26
Rated 5 out of
5
by
Dean Tecklenburg from
Anode Rod for Suburban Water Heaters
works perfectly...for some reason has lasted longer than the original water heater anode rod in our toyhauler...very
little deterioration over three years...taken out at the end
of each rv'ing season and tank drained/sealed...
Date published: 2012-05-31
Rated 5 out of
5
by
Anonymous from
Great Product
This really works! I've been using it for years. I put a new one in at the beginning of the camping season and in a few months, it is gross. PLEASE BRING BACK THIS PRODUCT!
Date published: 2007-05-16
Rated 5 out of
5
by
Clifford Janz from
Great value
The replacement anode rode is much more substantial and better quality than original at a very reasonable price
Date published: 2011-10-25
Rated 5 out of
5
by
Richard Williams from
Anode Rod
replaced our anode rod in out 5th wheel with this one and it works perfectly.
Date published: 2012-02-08
Q & A
What size of socket does it take to install a new hot water heater probe
A 1-1/16" socket is used to remove and install this anode rod.
Date published: 2019-12-02
What is the difference between Stock# 42180 and #18414. Both are for Suburban water heaters
SKU#18414 is made of aluminum while SKU#42180 is made of magnesium.
Date published: 2019-03-08
water heater Model # GRA 7
6.2 gal water heater 96 Winnabago ,will this replace??
The model code provided does not appear to be correct, but is in a format for an Atwood manufactured water heater. If the 'R' is substituted with a '6' it makes for a complete model number; G6A7. <a href=https://www.campingworld.com/anode-rod-for-atwood-water-heaters>SKU#18413</a> is used for Atwood water heaters.
Date published: 2019-03-08
Part number?
What is the part number (Suburban) for this item?
This anode rod is by Camco, part#11563. The Suburban Mfg. provided anode rod is part#232767 which we have listed as <a href=https://www.campingworld.com/suburban-anode-rod-replacement>SKU#42180</a>.
Date published: 2019-03-08
Will it fit Suburban SW12DEL?
Yes, this anode rod will fit your water heater.
Date published: 2019-03-08
What is the socket size to remove?
A 1-1/16" socket is used to remove and install this anode rod.
Date published: 2019-03-08
what is the thread count
My tank insert got stripped and I need to tap it and need to know the thread count so I can get the proper tap.
{e.g. NPT 18, NPT 14 }
According to Camco this anode rod is 9 threads per inch.
Date published: 2019-03-08
I need an 8 inch replacement Anode Rod do you have one
No, we do not have an 8" anode rod.
Date published: 2019-03-08