Bulldog Power Trailer Tongue Jack, Black

Catalog Item # 77812

Offers 3500 lb. lift capacity!

22" lift with drop leg. Bright LED light lets you see to hitch or unhitch after dark. Manual override with included crank handle. 12-volt. Mfr. 5 year warranty.

Technical Specifications

22 lbs.

by Fran – August 24, 2015
Is this jack universal , can I install this on a 2013 crossroads elevation
This powered tongue jack is universal in application. You will need to double check the diameter of the hole on the trailer tongue to verify if the 2-1/4" diameter of the jack can fit. As well as refer to the specs of your camper if the jack meets or exceeds the tongue weight of your trailer.
by Camping World – August 25, 2015
by JT – July 09, 2015
I have a trailer with the only power as the plug in to the vehicle, at the hitch area. How much electronics work does it take to connect to the electrical system? Should I hire a trailer company to draw the wires/electricity to the crank?
The installation instructions only refer to 2 leads from the jack and a built in circuit breaker which means minimal work. You can wire the jack directly to a standalone 12v battery. Or terminate your tongue jack by using an appropriate 4(round/flat), 6, or 7 pin trailer plug to connect to the towing wire harness from your tow vehicle to provide power. These two methods will avoid having to splice directly to a trailers electrical or tow vehicle.

Use a professional installer if not confident in wiring the tongue jack to a power source.
by Camping World – July 09, 2015

We have three tongue jack covers available. Item# 77614 by Stromberg Carlson Item# 78793 by Ultra-Fab Item# 69260 by Direcsource
by Camping World – June 30, 2015

Related Items

You May Also Like