Bumper Hatch, Set of 2
Item No. 34416
Bumper Hatch, Set of 2 is rated
out of
5 by
34.
Images
Details
https://www.campingworld.com/bumper-hatch-set-of-2-34416.html
Bumper Hatch, Set of 2
$14.79
$16.99
Save $2.20
(
13% Off
)
Additional Information
Features
Never lose your bumper cap or sewer hose again! The bumper hatch is a rugged polypropylene cover that has a one-piece, positive-locking snap. Screws hold each hatch in place on your bumper. Hatch is vented for proper air circulation and longer-lasting use. Fits all standard 4" square bumpers. Set of 2.
Show moreShow less
- Prevents loss of your bumper cap and sewer hose
- Rugged polypropylene construction
- One-piece, positive-locking snap
- Fits all standard 4" square bumpers
Specs
| Unit Weight | 0.40 lb |
|---|---|
| Brand | Design For Fun |
| MFG Part No. | 900 |
Reviews
Q & A
Never lose your bumper cap or sewer hose again! The bumper hatch is a rugged polypropylene cover that has a one-piece, positive-locking snap. Screws hold each hatch in place on your bumper. Hatch is vented for proper air circulation and longer-lasting use. Fits all standard 4" square bumpers. Set of 2.
Show moreShow less
- Prevents loss of your bumper cap and sewer hose
- Rugged polypropylene construction
- One-piece, positive-locking snap
- Fits all standard 4" square bumpers
| Unit Weight | 0.40 lb |
|---|---|
| Brand | Design For Fun |
| MFG Part No. | 900 |
Rated 3 out of
5
by
John Nickless from
Tired of losing end caps and hoses.
Just purchased this item and basically am very satisfied. However, I would make 1 big suggestion to the manufacturer. Make the fitting that goes into the bumper tapered so that it will fit slightly different size bumpers. It was the exact same size as my bumper so I had to attach a couple of thin alum. angles to slide into bumper. I used rivets to secure them instead of the screws. Less chance of snagging the hose The whole installation would look so much better if they tapered slightly and would slide into bumper... but it works and I hope it will save me loss of caps and hoses and embarrassment.
Date published: 2011-10-07
Rated 3 out of
5
by
John Nickless from
2nd Review of this Item
I should have taken a trip with this before reviewing it the
first time. As stated before, it needs to be tapered to fit
slightly different size bumpers. Also, the latch mechanism
needs to be more secure. I had to stop several time and
close it. It is basically a good system, but needs some
refinement. I plan on attaching a small clasp to each end
so that I can be sure it won't come open. Product
definitely needs some improvement. Would not purchase it
again. Would just make my own... not a difficult project.
Date published: 2011-10-27
Rated 5 out of
5
by
John Daniels from
Love them!
I put a set of these on our previous bumper-pull trailer, and when we had our new 5th-wheeler at the dealer for warranty repairs and got it back with both bumper plugs missing (they wouldn't give me a new set even though they disappeared while on their lot). I stopped at Camping World on my way home from there and bought another set of these for the new trailer! I love them! However, I might point out that in the photos above they show them mounted on the trailer so that they open toward the back of the trailer, which is probably why many claim to have these fly open while on the road. I've mounted both of mine so that the hinge is toward the front of the trailer so that the wind won't pop them open while on the road. I did drill small pilot holes for the supplied screws and have not had a problem with them being in the way inside the bumper when sliding the hoses in.
Date published: 2016-07-14
Rated 2 out of
5
by
CarnationSailor from
OK, But Snap Latch Is Useless
It will do the job, but not without a secondary way to secure the hatch. The snap closure is useless.
Date published: 2020-12-05
Rated 3 out of
5
by
Robert D. (Dan) McMurray from
Installation was less than perfect
The OEM bumper plugs were working their way out every few hours and we needed something better to keep from loosing hoses.. I purchased this product about a week ago, but did not put them on until yesterday evening.
As delivered, the screws were positioned such that they would block getting the sewer hose
in and out of the bumper. The screws are supposed to be self drilling; however, they would
not drill into my bumper. After I drilled pilot holes close to the bumper corners, through the
Bumper Hatch and bumper, the screws went in and held nicely.
Thus far, the Hatches latch properly and look like they will keep the sewer hoses in the
bumper. It will take a few thousand miles in 100+ degree weather and several months of
exposure to Texas sunshine to tell how well the product stands up.
Date published: 2012-08-05
Rated 5 out of
5
by
Rory from
Bumper caps
A good cap for the sewer hose in the bumper, I used it at the end where it doesn't matter, it has a couple of self tapping screws that go through the steel so you might get hung up on the points.The other end is a magnetic cap.
Date published: 2020-05-13
Rated 5 out of
5
by
John N Mercer from
Glad I bought them
Excellent product at a reasonable price.
I put these on back in August after mislaying one of the originals that came with my
trailer. There had been wasps circling around that open end, so I shot a healthy dose of
wasp and hornet killer into both ends of the bumper, then pulled the hose out after about
15 minutes. Glad I did it that way, I pulled the remains of a wasp nest out with the hose. I
haven't had any insect problems since I installed these, nor have I lost any more covers.
Date published: 2014-09-28
Rated 4 out of
5
by
Scott from
Good product
I have had these on for about 8 months and several trips. I
like the way they work and they look good. I used silicon
to attach them instead of screws, very solid.
Date published: 2007-10-15