Camco 90-Degree Water Hose Entry Elbow
Item No. 1745
Images
Details
https://www.campingworld.com/camco-90-degree-water-hose-entry-elbow-1745.html
Camco 90-Degree Water Hose Entry Elbow
Camco 90-Degree Water Hose Entry Elbow is rated
out of
5 by
37.
Item No. 1745
$5.63
$8.29
Additional Information
Perfect for RVs or just around the house, the Camco 90-Degree Water Hose Entry Elbow helps p revent crimping/strain and extend the useful life of your hose.
It lets the hose hang vertically, eliminating unnecessary stress and strain on any and all RV water intake hose fittings. Made of easy-grip, zinc-coated brass for years rust and trouble-free use. Maximum working pressure of 125 psi.
Show moreShow less
It lets the hose hang vertically, eliminating unnecessary stress and strain on any and all RV water intake hose fittings. Made of easy-grip, zinc-coated brass for years rust and trouble-free use. Maximum working pressure of 125 psi.
| Unit Weight | 0.20 lb |
|---|---|
| Brand | Camco |
| MFG Part No. | 22504 |
Camco 90-Degree Water Hose Entry Elbow is rated
out of
5 by
37.
Rated 4 out of
5
by
Joseph Peter Storrie from
90 Degree Elbow
The elbow is very handy. It makes connecting the water hose much easier. It is so simple to screw it into the water connector rather than the hose. Once the elbow is installed, screwing the hose on vertically is a much more natural motion. A hidden feature is that the elbow reduces the amount of hose that must be supported and changes the angle so that the stress/weight placed on the RV connector is significantly
reduced.
Date published: 2012-03-06
Rated 5 out of
5
by
Heavysledz from
great idea
I recently purchased the 90' water hose elbow for my travel trailer. It is a great idea and
design for releiving stress on the water inlet of the trailer as well as keeping the hose
from kinking due to no horizontal support. The only think that would makethis product
better would be for a swivel mount and quick disconnects to make hooking up even
easier.
Date published: 2011-07-22
Rated 5 out of
5
by
Jim Smith from
No kinks and doors open again.
This helped keep the hose straight at all times even when I opened my basement storage door. Usually that would mean hose kinks that would surely add to wear in time. I hook up the 90 and face it toward the rear and the door works perfectly and the hose is not affected. Water flow seemed to have not been slowed at all.
Date published: 2005-06-20
Rated 5 out of
5
by
J Bryant from
Solved my problem!
I constantly had my hose cross threaded therefore it took a few tries to get my water
hose attached. Once attached I always had leakage problems even with changing the
washers. Kept a pair of pliers handy to tighten tighter than my hand could. None of
these problems since using this elbow.
Date published: 2014-06-04
Rated 4 out of
5
by
Christine Giguere from
90 degree hose entry adapter
I added this to my vintage 1985 Sunline Camper to eliminate the stress of lining up
threads and not stripping the newly installed flush connector on camper. I love it and love
the ease of access without worrying about chronic use of connecting on my main line flush
unit
Date published: 2014-06-25
Rated 5 out of
5
by
Keith from
A Must Have for Me!
My class A motorhome requires the water hose to come through an opening in the floor of a basement compartment. This 90 degree elbow is necessary to hook the water hose to the motor coach (due to a lack of space) and still close the outer door to the basement compartment.
Date published: 2015-02-18
Rated 5 out of
5
by
Anonymous from
A Simple Must-Have
This item is really a must-have as it keeps your water hose up against
your RV and out of the walk way - without putting any kinks in your water
supply. Use it once and you will see that it is a no-brainer. Hope this
helps!
Date published: 2008-05-09
Rated 5 out of
5
by
Ralph Buscemi from
Simple product, Great idea.
I was tired of my fresh water hose sticking out from my
trailer. This simple adapter made hooking up my water system
much safer. The water hose goes straight to the ground
instead of sticking out away from my trailer.
Date published: 2013-12-27
Where is this manufactured?
This is manufactured in Vietnam.
Date published: 2019-03-08
Is this item lead free / safe for drinking water?
This elbow is 'lead free' according to current low lead laws.
Date published: 2019-03-08
What is the size of this 90 degree elbow?
Inner diameter: 1/2"
Date published: 2019-03-08
What is the horizontal measurement out to the outside edge of the vertical portion?
Horizontally including the threads it is 2.25", overall vertically it measures 1.75".
Date published: 2019-03-08