Classic LP Gas Alarm Flush Mount, Tan
Item No. 56358
Images
Details
https://www.campingworld.com/classic-lp-gas-alarm-flush-mount-tan-56358.html
Classic LP Gas Alarm Flush Mount, Tan
Classic LP Gas Alarm Flush Mount, Tan is rated
out of
5 by
7.
Item No. 56358
$47.94
$84.99
Additional Information
Let this LP gas alarm protect you from hidden dangers on the road. Ideal for RVs, this alarm is fully operational during mute mode. Mute does not override detection circuit, giving you full time protection. The flush-mount unit is designed with 12V wire and replaces most recessed-mount alarms installed since 1996. Loud 85dB alarm alerts you to any CO danger present that would be extremely harmful to you and your family. Test/Mute button mutes alarm during ventilation. Overall: 6-3/8"W x 2-7/8"H x 1"D. Cutout: 5-3/8"W x 2.0"H. One-year limited warranty.
Show moreShow less
| Unit Weight | 0.40 lb |
|---|---|
| Brand | MTI Industries |
| MFG Part No. | 30-442-BR |
Classic LP Gas Alarm Flush Mount, Tan is rated
out of
5 by
7.
Rated 5 out of
5
by
Linda from
Great Product
I was unable to find the brown version at the store, but was able to get it through the web
site. It was easy to install: two screws and two wires. It was a little smaller than the device I
was replacing, but I was able to adjust for that. My old unit was nine years old, which was
beyond the life expectancy, and was setting off false alarms. This unit works great. I would
buy it again. We were travelling with my brother and his wife on a three month trip when it
went out. Coincidentally, his went out about the same time. He purchased the same unit
and is very happy with his as well.
Date published: 2013-11-20
Rated 4 out of
5
by
Canuksteve from
Excellent Replacement item
My old alarm was eight years old and was starting to go off for no reason. Voltage was fine
and no gas leaks but lots of false alarms at really inappropriate times. This unit was easy
to install ; just two wires to connect with wire nuts. I tested it with a small propane torch
that I let run near the sensor for a couple or three seconds. It sensed the gas an the
alarm went off. Pretty happy with the super easy installation!
Date published: 2014-09-18
Rated 4 out of
5
by
Charles Marshall from
Replaces the CCI Propane Alarm
My original equipment CCI alarm used a plug to plug into the power supply. This had two wires. I had to cut the old wires to the plug and crimp these wires to the old ones. The mounting holes were also slightly different requiring me to angle the mounting screws to fit into
the existing holes. Functionally it is the same and I am happy with it. Five years from now it should be easy to mount a replacement.
Date published: 2013-11-22
Rated 5 out of
5
by
RoyBoy1 from
Nice propane detector replacement
I purchased this unit in store locally and installed it without any problems or issues. The size and holes from the original were almost an exact fit. I used new splice end connectors and taped and wired tied together for a nice fit. The unit worked upon hooking up the battery, tested out and worked well. I would recommend this unit to anyone wanting to update or replace your older version.
Date published: 2016-10-21
Rated 3 out of
5
by
Al R from
Classic LP Gas Alarm
The unit works fine. However it would have been better, had a sensor been available that was compatable with the original gas valve. It was necessary to replace both the alarm/sensor and the gas valve. Rather than spending $60 and no labor cost or further parts necessary, it cost me aproximately $335 for parts and labor.
Date published: 2012-01-16
Rated 5 out of
5
by
Woody Coggin from
Fit perfectly
I had to replace the detector in my RV and this one worked perfectly. I had to use small
wire nuts to connect my plug but it was no problem at all.
Date published: 2014-04-18
Rated 4 out of
5
by
Raymond Dietrich from
Works good
Works very good so far.
Date published: 2011-07-26
How much current does it draw?
Current Draw: 90mA @ 12VDC
Date published: 2019-03-08
how long should these last??
Our leak detector is 12yrs old. Do they go bad after a time period?
MTI recommends replacement of all LP/Propane alarms every 5 years.
Date published: 2019-03-08
size of unit
Dimensions: Overall: 6 3/8” W x 2 7/8” H x 1” D
Cut Out: 5 3/8" W x 2.0" H
Date published: 2019-03-08
Does gas alarm have a valve to shut off gas if needed?
It does not, no.
Date published: 2019-03-08
Wiring on the back of the unit?
Are there 2 or 3 wires on the back of this?
This is a 2 wire hookup.
Date published: 2019-03-08
Can it be mounted vertically?
It can, yes.
Date published: 2019-03-08