Dicor Elastomeric RV Roof Coating, Gallon

Catalog Item # 47594

Elastomeric Metal RV Roof Coating is formulated with 100% Acrylic resins to form a flexible coating that will expand and contract with the roof movement.

Technical Specifications

11 lbs.

Camper's Choice Rating

Reviewer rating of 5 stars based on 3 reviews (5 Based on 3 Reviews)

Add A Review


by Anonymous – June 07, 2014
5 out of 5 stars

applied in one evening. no leaks since.


by Linda Eastman – March 19, 2012
4 out of 5 stars

first order from camping world was a great experience. We just applied the dicor product. It filled in all the crackes easy but st

Motorcycle trailer

by Howitzer – August 31, 2012
5 out of 5 stars

Used this to seal a 20' motorcycle trailer with a metal roof. Put 3 to 4 coats on seams then 2 coats on the total roof, with the g

Directions for Use: Apply, un-thinned, at the rate of 200 square feet per gallon, per coat. For maximum performance, two coats are required. Apply each coat at right angles to each other by brush or roller. First coat must be dry before second coat is applied. Under normal conditions of 70°F (21°C ) and 50% relative humidity, the second coat may be applied within 1 to 2 hours at the same rate as the first coat. In order to prevent any chance of “wash off” of freshly applied coating, do not apply at temperatures below 50°F (10°C), or when rainfall, cold, darkness or high humidity are expected within 4 hours after application. During these 4 hours, at least 2 hours should be of direct sunlight. Allow 24 hours for full cure.
by Camping World – October 25, 2016
No, SKU#21208 is recommended since it will bond to just about any substrate material.
by Camping World – May 26, 2016
by chris – April 28, 2016
No, this product is recommended only for metal surfaces. ProFlex Brushable Sealant, SKU#21208, can be applied to wood substrates. Another option would be to use a product we no longer carry called Liquid Roof.
by Camping World – April 29, 2016

Related Items

You May Also Like