Dicor White Rubber Roof Acrylic Coating, Gallon

Catalog Item # 32151

Elastomer coating provides superior weather and UV resistance, flexibility, adhesion and ease of application.

Excellent protective elastomeric barrier for extending the life of your rubber roof membrane. Fire retardant.The Dicor Rubber Roof Coating System is a two part, commercial grade system from Carlisle Syntec that combines a primer/cleaner necessary for proper roof preparation and an acrylic coating that provides an excellent protective barrier.


White acrylic coating must be preceded with Dicor cleaner/activator to ensure proper adhesion. All cleaner/activator must be completely removed from roof prior to applying acrylic coating. All surfaces must be clean and free of residue or loose particles, degraded substrate, grease, oil, dirt, or other contaminates. Surfaces shall be completely dry and frostfree before coating. Deteriorated or damaged substrates shall be repaired or replaced.

Dicor acrylic coating shall be applied in a minimum of 2 coats at a rate of 1 gallon per 125 sq. ft per coat (i.e. 8' X 30' roof takes 4 gallons). Actual gallons required will depend on the type of surface and texture, method of application, and weather conditions at the time of application. All surfaces must be uniformly coated and free from voids, pinholes, or blisters.


Thoroughly mix the contents for a minimum of 15 minutes prior to application. Dicor acrylic coating may be applied by medium nap roller or brush. Clean equipment with water and a universal cleaner.


CAN CAUSE IRRITATION OF NOSE, THROAT AND LUNGS; CAN CAUSE NAUSEA AND HEADACHE. Prolonged or repeated breathing of vapor or spray mist may be harmful. Use a respirator for protection from vapor or spray mist. Avoid eye and skin contact. Do not take internally. Wash thoroughly after handling and before eating or smoking. Keep container closed when not in use.


Aqueous Acrylic Emulsions, Calcium Carbonate (471-34-1), Aluminum Trihydroxide (1645-51-2), Titanium Dioxide (13463-67-7)


Shipping could be delayed in the case of extreme weather/temperatures to ensure product quality.

Technical Specifications

12.6 lbs.

Camper's Choice Rating

Reviewer rating of 5 stars based on 23 reviews (5 Based on 23 Reviews)

Add A Review

  • Easy to use (3)
  • Excellent product (2)

Dicor Acrylic Coating

by Donnie – October 09, 2014
5 out of 5 stars

The acrylic coating worked great! I used 3 quarts of the coating primer cleaner and 2 gallons of the Acrylic coating. The only p

This stuff is Great

by Jay Harper – October 02, 2012
5 out of 5 stars

Thanks to all at camping world for your help choosing this product! It went on easy and after putting the product on it rained a f

2 Gllons for 30FT RV

by Anonymous – June 13, 2015
5 out of 5 stars

I just coated my RV roof with this yesterday, I used duct tape to hold the plastic and because of the morning dew only half of it

Used 2 times

by delbert mc claflin jr – October 10, 2014
5 out of 5 stars

Put 2 heavy coatings on my Bounder and the job is better than factory or any dealer service. Might of been a little over board b

Great product easy to use

by Michael Mann Sr. – September 09, 2012
5 out of 5 stars

Waited three weeks for Mother nature to let us get the roof coated. Wow what a great product. Three coats later and our roof loo

Dicor recommends the use of SKU#34837(spray bottle)/SKU#32181(1 gal. refill) for cleaning, and following up with a protectant like SKU#34838(spray bottle)/SKU#32182(1 gal. refill). Other brands can be used as long as they are rubber roof safe.
by Camping World – June 20, 2016
No, this coating does not repair any pinholes or tears in the membrane or substitute for a lap sealant/chalk for seams along the roof or rooftop accessories.
by Camping World – April 25, 2016
by Mick Dupo Il – March 24, 2016
No, you should look for Dicor's "Elastomeric Metal RV Roof Coating" or use SKU#21208.
by Camping World – April 05, 2016

Related Items

You May Also Like