Diesel Install Kit for Auxiliary and Transfer Fuel Tanks, Fits Ford (2001-up), Dodge (2012-down), and 2011 Chevy & GMC trucks (2011-up) with 1 1/2" fuel fill hoses
Item No. 56512
Images
Details
https://www.campingworld.com/diesel-install-kit-for-auxiliary-and-transfer-fuel-tanks-fits-ford-2001-up-dodge-2012-down-and-2011-chevy-gmc-trucks-2011-up-with-1-12quot%3B-fuel-fill-hoses-56512.html
Diesel Install Kit for Auxiliary and Transfer Fuel Tanks, Fits Ford (2001-up), Dodge (2012-down), and 2011 Chevy & GMC trucks (2011-up) with 1 1/2" fuel fill hoses
Diesel Install Kit for Auxiliary and Transfer Fuel Tanks, Fits Ford (2001-up), Dodge (2012-down), and 2011 Chevy & GMC trucks (2011-up) with 1 1/2" fuel fill hoses is rated
out of
5 by
3.
Item No. 56512
$65.00
$79.00
Save $14.00
(
18% Off
)
Additional Information
Designed to connect your RDS auxiliary or RDS transfer diesel fuel tank to your truck's fuel fill hose.
Automatically controls the fuel level going into your OEM tank. Kit includes hoses, clamps and fittings for easy installation. Intended for diesel fuel only. Works on diesel powered passenger trucks up through 350 or 3500 vehicle (not on diesel commercial/semi-trucks). Made in USA.
Show moreShow less
Automatically controls the fuel level going into your OEM tank. Kit includes hoses, clamps and fittings for easy installation. Intended for diesel fuel only. Works on diesel powered passenger trucks up through 350 or 3500 vehicle (not on diesel commercial/semi-trucks). Made in USA.
| Unit Weight | 1.52 lb |
|---|---|
| Brand | RDS |
| MFG Part No. | 011025 |
Rated 5 out of
5
by
Dennis Dixon from
Diesel install
This is the best thing I ever installed in my truck never worry about a mess or spills and you no the tank is empty
when you dash gauge starts to move
Date published: 2013-04-11
Rated 5 out of
5
by
Dennis Brown from
Diesel Install Kit
Took 30 minutes, two cups of coffee, and one donut to install. Hooked up to a 40 gallon
tank, works great.
Date published: 2014-02-17
Rated 5 out of
5
by
Randy Perry from
Great Product-Some Difficulty Installing...
2012-Dodge Laramie 3500 Ram Truck.
Became instantly apparent the outer molding & inner wheel
well housing had to be removed to access the steel fuel line
inlet tube on main tank, (I do have the 1.5 inch fuel
fill line). Removed factory hose clamps, where the
rubber hose connects to the fuel neck coming off the main
fuel tank. Then, literately, had to cut the factory rubber
hose off to remove it. It is a tight fit. Note. If
at all possible, try to save the factory hose as it can be
reused in place
of the two 1.5 rubber hoses that are sent in the kit. This
hose has a factory bend molded into it. You will need a
straight chunk of hose to fit from the metal 1.5
pipe to
the fuel tank.. short as possible. You want
the 1.5 pipe touching the plastic neck of the tank inlet.
the outer hose (the hose that goes between the kit pipe and
the fill neck has to have almost a 30-40 degree bend to make
that connection. It is a very tight fit. That's why I say
use the factory hose if possible. Kit comes with two 1.5
clamps. You will need 4 total to make these connections.
After mounting the diesel tank, drill a 3/4 hole in the side
of the truck bed,
directly off and adjacent to the petcock of your auxiliary
tank. I used a key-hole saw bit. Makes a clean smooth cut.
Then remove any metal burs that might have remained from
cutting hole. Connect 1/4 ID hose, clamp both ends. One
clamp on each end is sufficient.
Reinstall wheel well/molding. Make sure fill caps
on both tanks are tightened until they ratchet or click
several times. Open petcock on auxiliary tank. You're
good to go.
Took me a good hour. My recommendation... If Camping World
does the
job for an installation fee, I'd just get them to do it,
depending on whether you have mechanical experience or not.
In conclusion... Great kit for the price. Good Sam Members
get a discount which really helps. Enjoyed the installation,
but did scrape a couple knuckles, but what fun would it be
if you didn't. Good Luck! Camp on!
Date published: 2014-04-20
Will this fit a 2015 Ford F350
Yes, this will work for a 2015 Ford F350.
Date published: 2019-03-08
What is the mechanism of control to prevent overfill of the primary tank?
A rollover valve is used to keep the primary tank from overfilling from the auxiliary tank.
Date published: 2019-03-08
what is size of hose from tank to filler insert?
Inside diameter is 5/16" for the hose that connects the auxiliary tank to the filler insert.
Date published: 2019-03-08