Dual Tire Inflators - Hub Mount Stainless Steel - 4 Hose Kit for 16"-19.5" Wheels
Item No. 5786
Dual Tire Inflators - Hub Mount Stainless Steel - 4 Hose Kit for 16"-19.5" Wheels is rated
out of
5 by
7.
Images
Details
https://www.campingworld.com/dual-tire-inflators---hub-mount-stainless-steel---4-hose-kit-for-16quot%3B-19.5quot%3B-wheels-5786.html
Dual Tire Inflators - Hub Mount Stainless Steel - 4 Hose Kit for 16"-19.5" Wheels
$53.89
$59.89
Save $6.00
(
10% Off
)
Additional Information
Features
Easy to install, no special tools required, the hoses attach to your existing valve stem (no need to remove valve core) allowing proper inflation and pressure checks in seconds.
Each kit comes complete with everything you need for the specific wheel application. These heavy duty inflators are constructed of high quality two ply rubber tubing reinforced with a tough nylon braiding. For added protection a stainless braided hose wrap is available to withstand the elements and road hazards.
Checking & inflating tires is as easy as 1, 2, 3!
Determine your mounting system
Airless Stainless Steel
Determine how many hoses you need
. Two hose kit (inner dual wheels only). Four hose kit (bothh inner & outer wheels)
Show moreShow less
Each kit comes complete with everything you need for the specific wheel application. These heavy duty inflators are constructed of high quality two ply rubber tubing reinforced with a tough nylon braiding. For added protection a stainless braided hose wrap is available to withstand the elements and road hazards.
Checking & inflating tires is as easy as 1, 2, 3!
Determine your mounting system
Airless Stainless Steel
Determine how many hoses you need
. Two hose kit (inner dual wheels only). Four hose kit (bothh inner & outer wheels)
- Hub Mount
- Hand Hole Mount
- Wheel Cover Mount
Determine which style fits your budget - Rubber 2 ply
- Stainless Steel
Specs
| Unit Weight | 1.00 lb |
|---|---|
| Brand | Wheel Masters |
| MFG Part No. | 8001 AM4 |
Reviews
Rated 5 out of
5
by
Itasca Navion IQ owner from
Great product
Bought a set of these in 2008. Installation was straight forward and not complicated. Makes checking the rear duals on our Itasca Navion IQ really simple. They have held up well and I would recommend them for dual wheels where you don't have easy access to the valve stems.
Date published: 2012-07-11
Rated 5 out of
5
by
Roger Girouard from
Absolutely necessary for dual tires
This is a great product and very durable. Have had my set for my dually since 1999 and it is still going strong. Makes tire pressure checking a snap (and you should do this before every trip) . Can't agree that no special tools are required tho because you will need a pop rivet gun to mount to the hub caps.
Also had problem with rubber valve stems. Had one come out and lost a tire. I highly recommend having steel valve stems installed before installing this kit. Overall - very happy.
Date published: 2012-04-28
Rated 4 out of
5
by
Robert Sloane from
Ddual inflators
Installed the set on my 2006 F350 this weekend. After careful measuring and alighning of wheels on hub. I attached the brackets to my factory hub covers. looks pretty good.
So far so good. Will check them every day for a couple days, but I am happy.
Date published: 2005-11-21
Rated 5 out of
5
by
Douglas Whittington from
accurate description of the product
For a diy, these are easy to install and work as advertised. I have used these before on a
motorhome but put these on my duallie. Highly recommend them. Make it easy to keep rear
tires at proper inflation.
Date published: 2013-07-17
Rated 5 out of
5
by
Joe Raborn from
Dual tire inflator
Real nice set, But if you use them with hub caps or wheel covers,you will have to order other hardware parts to make them work!
Date published: 2006-08-17
Rated 4 out of
5
by
Ben Reisz from
Essential for Dual Rear Wheels
I have a 2013 Ford F-350 and more often than not, found myself having to remove the
outside tire to properly inflate the inner rear tire. What a pain in the a**. Looked at most
of the tire and truck stores for extended valve stems and couldn't find anything. Bought
these from camping world. Installation and mounting was straightforward and easy.
I've detected one of them has a very small leak, but should be able to adjust properly.
Both valve stems are now located at the outter hub of the outside tire, so inflation is a
breeze. Why didn't I do this years ago? I also use a tire pressure monitoring system
on my truck tires and it appears to be working quite well with this system. On a Ford,
this system requires a small hole to be drilled in the plastic hub cover for the angle
bracket that will support the stainless steel hoses. The bracket is fastened to the hub
with two pop rivets. Sounds flimsy, but it feels solid and secure. Be sure to mount the
hoses on opposite sides of each hub to avoid wheel balance problems. If you've ever
lost part or all of any religion you have trying to inflate the inner tires on a dually, you'll
love a set of these stainless steel valve extenders.
Date published: 2013-04-26
Q & A
Would this work on a 2017 Winnebago View 24J?
I put a set on a 2018 Winnebago so I would assume these would fit a 2017 also. I mounted mine with screws to the wheel liner hub; has worked great since installed over 2 years ago.
Date published: 2019-10-02
Do you need to remove the outer tire to install?
If you can reach the valve stem on the inner tire via hand holes, no. <a href=http://wheelmasters.com/pdfs/8001%20installation%20instructions.pdf>Installation Instructions</a>
Date published: 2019-03-08
I need the two long extenders to be 12 in. long, are they?
The longer hoses are 13", the shorter two are 9.5".
Date published: 2019-03-08