Eccotemp L10 Portable Tankless Water Heater and Flojet Pump

Catalog Item # 84327

The Eccotemp L10 Portable Tankless Water Heater is one of the hottest tankless water heaters on the market!

The Eccotemp L10 Portable Tankless Water Heater is one of the hottest tankless water heaters on the market! The Eccotemp L10 Tankless Water Heater gives you endless hot water at your cabin, summer cottage, lake home, potting shed, RV, camper, farm or wherever else you need hot water. The Eccotemp L10 Portable Tankless Water Heater delivers up to 2.6 Gallons Per Minute of hot water ranging from 80-145 degrees Fahrenheit: plenty for 1-2 hot water applications running at the same time. The 2 ""D"" cell battery ignition starts the flame only when water is running, so there's no chance of overheating. It is perfect for off grid or areas where you have limited electricity. The L10 comes with standard 1/2"" NPT fittings. The ideal operating range is 20-80 PSI. The system also works great on modified water systems with items such as a 12-volt pump.

Product Features:

  • Compact & easy to store
  • Great for camping & family outings
  • Outdoor use only
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • Battery powered ignition
  • Manual water temperature control
  • 20 Minute automatic safety shutoff timer
  • Energy Factor of 79%
  • Rated Voltage: 3V (D cell batteries)
  • 74,000 BTU
  • 2.6 GPM flow capacity
  • Water Pressure: 20-80 PSI
  • Rated heat input: 20kw
  • Rated gas pressure: 11"" of water column
  • Gas type: Liquid propane

    Eccotemp L10 Dimensions:

  • Height 25.5""
  • Width 13.625""
  • Depth 8""
  • Weight approx. 27 lbs.
  • Shipping weight 28.7 lbs.

    Clearance Requirements (at least):

  • 2"" clearance from wall
  • 1' on both sides from anything flammable
  • 3' from any window, overhand, awning
  • 18"" from the ground

    What’s Included:

  • Stainless steel rain cap
  • Garden hose adapter
  • CSA regulator for use with standard 20 lb. grill propane tank
  • 1-year manufacturer warranty

    The Flojet 2.9 GPM at 50 PSI pump has a built-in pulsation eliminator that ensures smooth flow without the need for an accumulator tank. Soft, absorbing mounts reduce annoying vibration and noise while running. Self-priming pump can safely run dry. Snap-in ½"" port fittings simplify installation. Made of corrosion resistant materials.

    Product Features:

  • 2.9 GPM, 50 PSI, 12 Volt, 4.4 Amp
  • Self-Priming
  • Soft, Noise Absorbing Mounts
  • Can safely run dry
  • Snap-in 1/2"" Port Fittings
  • Made of Corrosion Resistant Materials

  • Technical Specifications

    31 lbs.

    by Lora – May 03, 2017
    This is for outdoor use only.
    by Camping World – June 15, 2017
    I am trying to find a pressure pump for my non pressurized vacuum tube solar water heater and the pump must go on the hot water side of the holding tank. Do you have any suggestions?
    If the water source is not pressurized then configuration, using this L10 WH and pump as an example, would be: Water Source > Water Pump > Water Heater. However, if your Solar WH is operating more as a reservoir of heated water and need to 'evacuate' the water to destination you would go Solar Water Heater > Water Pump. Hopefully that helps.
    by Camping World – October 01, 2015

    Related Items

    You May Also Like