Flying Insect Screen for Atwood 6 & 10, Suburban 6 Water Heaters
Item No. 37388
Flying Insect Screen for Atwood 6 & 10, Suburban 6 Water Heaters is rated
out of
5 by
30.
Images
Video(s)
Details
https://www.campingworld.com/flying-insect-screen-for-atwood-6-10-suburban-6-water-heaters-37388.html
Flying Insect Screen for Atwood 6 & 10, Suburban 6 Water Heaters
$15.94
$21.99
Save $6.05
(
28% Off
)
Additional Information
Features
Protect your unit from flying insects with the Flying Insect Screen for RV water heaters. Wasps, mud dauber nests, birds, and rodents pose a serious threat to your RV water heater, furnace, and stove. They can enter through vents and openings and cause serious damage by building nests that interfere with air flow. Protect your valuable investment by purchasing and installing a flying insect screen. These easy-to-install screens will help ensure that your vents stay free from costly invasion by unwanted pests.
Show moreShow less
- Designed for Atwood 6 & 10, Suburban 6 models
- Protect your unit from flying insects
Specs
| Unit Weight | 0.40 lb |
|---|---|
| Brand | Camco |
| MFG Part No. | 42145 |
Reviews
Q & A
Protect your unit from flying insects with the Flying Insect Screen for RV water heaters. Wasps, mud dauber nests, birds, and rodents pose a serious threat to your RV water heater, furnace, and stove. They can enter through vents and openings and cause serious damage by building nests that interfere with air flow. Protect your valuable investment by purchasing and installing a flying insect screen. These easy-to-install screens will help ensure that your vents stay free from costly invasion by unwanted pests.
Show moreShow less
- Designed for Atwood 6 & 10, Suburban 6 models
- Protect your unit from flying insects
| Unit Weight | 0.40 lb |
|---|---|
| Brand | Camco |
| MFG Part No. | 42145 |
Rated 3 out of
5
by
Kenneth Weygant from
Poor way to attach screen
After a frustrating go at attaching the screen with the two provided springs, I hot footed it to my local hardware store and purchased four stainless steel machine screws
including needed nuts and flat and lock washers. I then had it installed in no time with the insurance that I wouldn't
lose the screen somewhere down the road if using the provided springs. However, I still would recommend the
purchase of this item versus going without.
Date published: 2012-11-30
Rated 4 out of
5
by
Larry M from
Does not fit
Better measure your vent before ordering this. This
particular screen did not fit my Suburban heater vent hole
and CW does not stock the one that does. They had to special
order from the manufacturer. Other than that, all of these
insect screens are of good quality. I think these large
screens need at least 4 of the springs to keep them securely
in place.
Date published: 2014-05-01
Rated 4 out of
5
by
mlusk from
screen for water heater
Was easy to install and fit well. Will need to see how well it stays on and how long the
little springs last. I noticed that the edge of the screen left little marks on the side of the
trailer as I moved it around. Perhaps a little coating of non-marking rubber on the edge
would be helpful, even if does raise the price a buck or so.
Date published: 2014-01-16
Rated 3 out of
5
by
Perry Noll from
Very tricky to install
When installing this screen, they give you two tiny springs which holds the screen in
place, you have to use this tiny tool to grab the springs and push them into place...Very
hard to do.. Other than that once installed seems to keep the wasps and mud dobbers
out.
Date published: 2012-03-30
Rated 5 out of
5
by
Charles Sexton from
Flying Insect Screen for Atwood 6 & 10, Suburban 6 Water Heaters
A small price to pay for the protection that you will get from this screen. It was a little tricky to
get the springs hooked to hold it on, but the tool that came with it made it easier. I was
concerned about if falling off, but after 2 trips it 's still in place.
Date published: 2012-08-31
Rated 4 out of
5
by
shane Allman from
A good purchase
Was very easy to install and fit perfectly. I only wish that they came with 4 mounting
springs instead of two so that it would fit tighter and not slide around as easily. Note that
this will scratch your camper if allowed to move around too much
Date published: 2014-04-26
Rated 4 out of
5
by
Vernon L Norris from
Needs a cushion
Good fit, easy install, but needs some type of cushion to keep from rubbing paint from RV as it will easily move in the wind when traveling since it's held in place by springs. Plan to locate some type of cushion before traveling with it.
Date published: 2015-03-02
Rated 5 out of
5
by
Connie from Texas from
Mud daubers made nest in water heater last summer
and it took me an hour to scrape all of nest out of tube with straightened hanger.
Hopefully this will keep it from happening this summer. Neighbors surprised that such
screens exist and thought awesome.
Date published: 2012-05-19
Does this fit the newer style atwood suburban style vents?
We have a 2016 5th wheel, and we were told that the older vent screens will not fit the newer vents on the Atwood Suburban water heaters.
SKU#37388 will fit a majority of Suburban and Atwood water heater doors. However, for the doors that have intake louvers on Suburban units, use SKU#81386. For Suburban units that are flush mounted, look for Camco <a href=http://camco.wpengine.com/product/for-suburban-6-gallon-flush-mount-water-heaters-10921/>part#42151</a>.
Date published: 2019-03-08
What is the size of the flying insect screen?
1.5" tall, 5.75" wide, 8.5" long.
Date published: 2020-06-03