Heng's Replacement Roof Vent, White Lid w/White Metal Base
Item No. 8131
Heng's Replacement Roof Vent, White Lid w/White Metal Base is rated
out of
5 by
8.
Images
Details
https://www.campingworld.com/heng%27s-replacement-roof-vent-white-lid-wwhite-metal-base-8131.html
Heng's Replacement Roof Vent, White Lid w/White Metal Base
$48.49
$53.89
Save $5.40
(
10% Off
)
Additional Information
Features
Replace your old or damaged roof vent with the Heng's Roof Vent. The improved design of the Heng's Roof Vent includes a Vent Lock that keeps the lid from opening and rattling while you're driving your RV. The new EZ-Change Lid lets you replace the lid in just 5 minutes. This Roof Vent comes with a white painted metal base, metal hand crank, and inside trim.
• Self-centering metal base with radius corners
• Wider 1-1/4" flange covers all screw holes
• Designed to withstand excessive wind and weather
• Interchangeable with existing Elixir and Ventline products
• Simple manual crank up/down operation
• White lid with white painted metal base
• Fits standard 14" x 14" opening
Show moreShow less
• Self-centering metal base with radius corners
• Wider 1-1/4" flange covers all screw holes
• Designed to withstand excessive wind and weather
• Interchangeable with existing Elixir and Ventline products
• Simple manual crank up/down operation
• White lid with white painted metal base
• Fits standard 14" x 14" opening
- Vent Lock keeps the lid from opening while you're driving
- EZ-Change lid lets you replace the lid in just 5 minutes
- Fits standard 14" x 14" opening
- Simple manual crank up/down operation
- White lid with white painted metal base
Specs
| Color | White |
|---|---|
| Unit Weight | 4.80 lb |
| Brand | Heng's Industries |
| MFG Part No. | 71311A-C1G2 |
Reviews
Q & A
Replace your old or damaged roof vent with the Heng's Roof Vent. The improved design of the Heng's Roof Vent includes a Vent Lock that keeps the lid from opening and rattling while you're driving your RV. The new EZ-Change Lid lets you replace the lid in just 5 minutes. This Roof Vent comes with a white painted metal base, metal hand crank, and inside trim.
• Self-centering metal base with radius corners
• Wider 1-1/4" flange covers all screw holes
• Designed to withstand excessive wind and weather
• Interchangeable with existing Elixir and Ventline products
• Simple manual crank up/down operation
• White lid with white painted metal base
• Fits standard 14" x 14" opening
Show moreShow less
• Self-centering metal base with radius corners
• Wider 1-1/4" flange covers all screw holes
• Designed to withstand excessive wind and weather
• Interchangeable with existing Elixir and Ventline products
• Simple manual crank up/down operation
• White lid with white painted metal base
• Fits standard 14" x 14" opening
- Vent Lock keeps the lid from opening while you're driving
- EZ-Change lid lets you replace the lid in just 5 minutes
- Fits standard 14" x 14" opening
- Simple manual crank up/down operation
- White lid with white painted metal base
| Color | White |
|---|---|
| Unit Weight | 4.80 lb |
| Brand | Heng's Industries |
| MFG Part No. | 71311A-C1G2 |
Rated 5 out of
5
by
Laurie from
nice product, nice price
This vent works very well. Opens and closes very smoothly. Requires 28 screws to install; however, the screws do not come with it. The universal vent installation kit I purchased separately only comes with 24 screws, so be sure to keep the screws from your old vent. My husband installed this himself with no problems. He installed a Rambler vent cover over it. It cannot open all the way with the cover; however, still works
great as the Rambler cover has side vents which makes a big difference in the air flow.
Date published: 2011-08-21
Rated 4 out of
5
by
Randy from
Good product, but not entirely universal
Decent, basic vent fir the money. I wasn’t aware that my roof was considerably thicker than this “universal” vent was made for. I used the original inside portal cover which salvaged the install, but that was disappointing. The interior piece that came with it was a few inches too short.
Date published: 2021-08-29
Rated 5 out of
5
by
Bryan Crawford from
Easy to install, cost effective replacementq
The hardest part of replacing my busted out skylight was scraping off the old sealant to get the screws out of the old one. Fast, easy installation and a direct fit replacement. Much easier than I anticipated.
Date published: 2012-02-03
Rated 5 out of
5
by
William Baker from
Vent Purchase
This product was much better constructed than others I had inspected and it fit perfectly with all the right hardware. I would strongly recommend this purchase to everyone looking for the best.
Date published: 2012-08-30
Rated 3 out of
5
by
Stephen from
Vent replacement
Easy to install, functions well but very light weight compared to the one replace - on
horse trailer.
Date published: 2011-10-03
Rated 4 out of
5
by
Rande Clark from
vent install
Installed very easy, works great, looks great! good value for the money (so far).
Date published: 2011-10-17
Does this attach from the inside or outside?
Exterior attachment; screws are mounted down on the flange to the roof.
Date published: 2019-03-08
what is the difference between this roof vent and the E-Z mount vent item #12190
The E-Z Mount Vent, #12190, uses a compression clamp mount between the exterior and inner sections of the vent. Instead of having to screw down the exterior flange, four screws on the interior are used to mount both sections together and in place.
Date published: 2019-03-08
Is the interior garnish included?
Yes, the interior garnish is included.
Date published: 2019-03-08
Is this a standard/universal size?
I have a 2005 Fleetwood Pioneer travel trailer and want to be sure I am ordering the correct replacement part.
This vent uses the standard 14 x 14 opening for installation, considered universal, yes.
Date published: 2019-03-08
What installation kit is required?
Item 31553 for rubber roof, item 8491 for fiberglass/metal roof.
Date published: 2019-03-08
Does this crank up or push?
The lid cranks up.
Date published: 2019-03-08
Does it come with bug screen? Does it come with sealant or must that be purchased separately?
My daughter drove the motor home through too low an opening and wiped off all the roof mounted items. The bathroom vent structure must be replace but the fan is still ok. Will this unit accomodate the old fan or do I need to purchase the entire unit with fan.
Since the air conditoner is also gone, I need to fill that 14 inch square hole with a vent. Will this unit work ok for that application? What typle of sealing system do I need to use when installing these vents?
These do include a "pop in" screen, and will accomodate most fans. To seal after installation, we recommend the self leveling lap sealant from Dicor.
Date published: 2019-03-08