Hyperlite Eden Wakeboard With Blur Bindings

With a softer flex, the Hyperlite Eden is a great choice for the female rider looking to advance her riding abilities. Learning from other asymmetrical designs, Hyperlite found that creating a shorter, but more effective edge on a rider's toe-side made difficult wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the Eden 2.0's thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge complements this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area.

Bio 3 Core: This core material is the gold standard in the industry and used throughout the Hyperlite line. Bio 3 is the lightest and most durable formula to date.

Satin Flex: Tailored specifically to a female rider's needs. A softer glass layup to create a softer flex and a board built to female rider standards.

Layered Glass: Hyperlite's fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass, every Hyperlite deck will have the same pop off the double up year after year.

Monocoque Construction: Integrating the top glass and the bottom glass into one creates a more durable board on side impacts, thus preventing delamination.

Abrupt Continuous Rocker: This rockerline adds a little more kick to the speed that so many riders look for. It transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake.

Blur Bindings: The Blur with three closure points is an easy style to slip into when you're ready to hit the wakes. These closure points also give a rider many options when it comes to the fit of their boot. The lower Velcro strap and center lace zone can be cinched down to help with a snug fit, and the upper Velcro strap can be tightened for a little additional support. The Blur is a fully adjustable design which allows for a wide array of foot sizes. The Low-Pro plate features the most lightweight feel and provides a close-to-the-board connection. The plush footbed makes for a super comfortable ride whether it is your first or last set of the day. Dual-density footbed. Articulating cuff. Integrated shell and liner closure system. Sizes: S(4 - 8-1/2), STD(8 - 11).

Eden 125
• Length: 49.2"
• Width: 16.2"
• Total Surface Area: 697"
• Tip/Tail Width: 9.9"
• Rocker Style: Subtle 3-Stage
• Rocker Height: 2.4"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 20" - 24"
• Rider Weight: up to 130 lbs.
• Hole Pattern Offset: 6"

Eden 130
• Length: 51.2"
• Width: 16.4"
• Total Surface Area: 738"
• Tip/Tail Width: 10.1"
• Rocker Style: Subtle 3-Stage
• Rocker Height: 2.5"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 21" - 25"
• Rider Weight: up to 155 lbs.
• Hole Pattern Offset: 6"

Eden 135
• Length: 53.1"
• Width: 16.8"
• Total Surface Area: 780"
• Tip/Tail Width: 10.3"
• Rocker Style: Subtle 3-Stage
• Rocker Height: 2.6"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 22" - 26"
• Rider Weight: 145+ lbs.
• Hole Pattern Offset: 6"