Hyperlite Eden Wakeboard With Blur OT Bindings

With a softer flex, the Hyperlite Eden is a great choice for the female rider looking to advance her riding abilities. Learning from other asymmetrical designs, Hyperlite found that creating a shorter, but more effective edge on a rider's toe-side made difficult wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the Eden 2.0's thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge complements this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area.

Satin Flex: Tailored specifically to a female rider's needs. A softer glass layup to create a softer flex and a board built to female rider standards.

Layered Glass: Hyperlite's fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass, every Hyperlite deck will have the same pop off the double up year after year.

Bio 3 Core: This core material is the gold standard in the industry and used throughout the Hyperlite line. Bio 3 is the lightest and most durable formula to date.

Monocoque Construction: Integrating the top glass and the bottom glass into one creates a more durable board on side impacts, thus preventing delamination.

Find all the support you need to wakeboard with the Blur boot. The Blur has a hyperplush rear flex zone and articulating cuff that keep the binding flexible for all day comfort. Three closure points allow customization of the fit. Lower Velcro strap and center lace zone can be cinched down to help with a snug fit, while the upper Velcro strap can be tightened to additional support. Fully adjustable design of this binding fits wide range of foot sizes. Low Pro plate keeps the rider's feet close to the board for the utmost in control and response. Integrated shell and liner closure system. Dual density, plush footbed. Sizes: M(4 - 8-1/2), L(8 - 11).

Eden 125
• Length: 49.2"
• Width: 16.2"
• Total Surface Area: 697"
• Tip/Tail Width: 9.9"
• Rocker Style: Subtle 3-Stage
• Rocker Height: 2.4"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 20" - 24"
• Rider Weight: up to 130 lbs.
• Hole Pattern Offset: 6"

Eden 130
• Length: 51.2"
• Width: 16.4"
• Total Surface Area: 738"
• Tip/Tail Width: 10.1"
• Rocker Style: Subtle 3-Stage
• Rocker Height: 2.5"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 21" - 25"
• Rider Weight: up to 155 lbs.
• Hole Pattern Offset: 6"

Eden 135
• Length: 53.1"
• Width: 16.8"
• Total Surface Area: 780"
• Tip/Tail Width: 10.3"
• Rocker Style: Subtle 3-Stage
• Rocker Height: 2.6"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 22" - 26"
• Rider Weight: 145+ lbs.
• Hole Pattern Offset: 6"