Hyperlite Murray Wakeboard With Team X Bindings

Shaun Murray's favorite, shaped from 20 years of Wakeboard passion. The Murray shape begins with a Subtle 3-Stage Rocker, where the rocker simply increases under foot for a colossal boost of the wake. Carrying on from past shapes, Shaun kept the Variable Edge Design and Center Landing Spine making the board enjoyable for all ability levels. The board's edge is rounded between the inserts, sharpening under foot and then cupped at the tip and tail to deliver solid edge hold when you want it and forgiveness when you need it. Hyperlite's BIO3 Core and CarboNetX construction keep the Murray super light for easy spinning. This combination makes riding a larger board more suitable.

Layered Glass: Hyperlite’s fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass, every Hyperlite deck will have the same pop off the double up year after year.

Bio 3 Core: This core material is the gold standard in the industry and used throughout the Hyperlite line. Bio 3 is the lightest and most durable formula to date.

Monocoque Construction: Integrating the top glass and the bottom glass into one creates a more durable board on side impacts, thus preventing delamination.

Sized Up: As wake sizes have increased, Hyperlite found that a larger board delivers more pop, as the more board (surface area) you can push into the water, the more energy is created for pushing you into the air. Larger boards also equate to a mellower ride, making landings easier and providing a more soulful, soothing ride.

Team X Bindings: The Team X bindings are constructed around Hyperlite's custom lasted technology, so comfort is guaranteed and the support is customizable with dual lace zones. If you're a seasoned pro or just getting comfortable standing sideways, this is the perfect boot for you. The Team X closed toe boot offers mid-range support for the rider looking for a little extra flex, but the boot loses no hold thanks to its heel retention strap. This feature pulls the rider's foot into the heel pocket as the boot is laced for reduced lift. Dual quick cinch lace zones and seamless liner construction allow for a fit that produces no pressure points. The Team also utilizes the Low Pro plate system for a lighter weight feel and the closest boot-to-board connection for great control and response. Sizes: XS(7 - 8), STD(9 - 10), XL(11 - 12).

Murray 134
Length: 52.8"
Width: 16.9"
Total Surface Area: 796"
Tip/Tail Width: 11"
Rocker Height: 2.42"
Fin Type (Qty.): 0.8" P-Wing (4)
Stance Options: 22" - 26"
Rider Weight: 140+ lbs.
Hole Pattern Offset: 6"

Murray 139
Length: 54.7"
Width: 17.1"
Total Surface Area: 832"
Tip/Tail Width: 11.1"
Rocker Height: 2.51"
Fin Type (Qty.): 0.8" P-Wing (4)
Stance Options: 22" - 28"
Rider Weight: up to 175 lbs.
Hole Pattern Offset: 6"

Murray 144
Length: 56.7"
Width: 17.7"
Total Surface Area: 888"
Tip/Tail Width: 11.5"
Rocker Height: 2.56"
Fin Type (Qty.): 0.8" P-Wing (4)
Stance Options: 22" - 26"
Rider Weight: over 160 lbs.
Hole Pattern Offset: 6"

Murray 150
Length: 59.1"
Width: 18.3"
Total Surface Area: 960"
Tip/Tail Width: 11.9"
Rocker Height: 2.56"
Fin Type (Qty.): 0.8" P-Wing (4)
Stance Options: 23" - 26"
Rider Weight: over 170 lbs.
Hole Pattern Offset: 6"