Hyperlite State 2.0 Wakeboard With Remix OT Bindings

Advancing your skills quicker with advanced shape technology. Creating a shape to take riders' skills to the next level was the goal behind the State 2.0. Learning from other asymmetrical designs, Hyperlite found that creating a shorter but more effective edge on a rider's toe-side made difficult wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the State 2.0's thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge complements this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area. The State 2.0 has been tested and proven to be the best choice for a rider looking to master the foundations of wakeboarding.

Layered Glass: Over time, traditional woven glass fibers will separate. With layered glass, every Hyperlite deck will have the same pop off the double up year after year.

Monocoque Construction: Integrating the top glass and the bottom glass into one creates a more durable board on side impacts, thus preventing delamination.

Hyperlite Remix boots are supportive, easy to get into, and offer tons of support. Dual lace zones let you customize your fit just as they do on the more expensive boots. The flexible feel of this open toe design will be comfortable all day, and the 3D molded tongue provides maximum comfort with no sacrificed board control. The Remix is an excellent option for beginner to intermediate riders looking for a user-friendly boot. Low Pro Plate keeps the rider closer to the board to provide the utmost in control and response. The solid, traditional design of the Remix boots also includes an adjustable floating toe and dual density footbed. Sizes: S(4 - 8), M(7 - 10-1/2), L(10 - 14).

State 2.0 125
• Length: 49.2"
• Total Surface Area: 740"
• Tip/Tail Width: 11.4"
• Center Width: 15.9"
• Rocker Style: Abrupt Continuous
• Rocker Height: 2.2"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 20" - 24"
• Rider Weight: up to 130 lbs.
• Hole Pattern Offset: 6"

State 2.0 130
• Length: 51.2"
• Total Surface Area: 775"
• Tip/Tail Width: 11.9"
• Center Width: 16.6"
• Rocker Style: Abrupt Continuous
• Rocker Height: 2.5"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 21" - 25"
• Rider Weight: up to 155 lbs.
• Hole Pattern Offset: 6"

State 2.0 135
• Length: 53.1"
• Total Surface Area: 810"
• Tip/Tail Width: 12.5"
• Center Width: 17.1"
• Rocker Style: Abrupt Continuous
• Rocker Height: 2.6"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 22" - 26"
• Rider Weight: 145+ lbs.
• Hole Pattern Offset: 6"

State 2.0 140
• Length: 55.1"
• Total Surface Area: 845"
• Tip/Tail Width: 12.5"
• Center Width: 17.25"
• Rocker Style: Abrupt Continuous
• Rocker Height: 2.7"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 22" - 26"
• Rider Weight: 160+ lbs.
• Hole Pattern Offset: 6"

State 2.0 145
• Length: 57.1"
• Total Surface Area: 880"
• Tip/Tail Width: 12.5"
• Center Width: 17.25"
• Rocker Style: Abrupt Continuous
• Rocker Height: 2.85"
• Fin Type (Qty.): 1.3" Disorder (2)
• Stance Options: 22" - 26"
• Rider Weight: 165+ lbs.
• Hole Pattern Offset: 6"