Lenco Heavy Duty Performance Trim Tab Kit w/Standard Switch Kit - 12" x 12"
Item No. 348893
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 66ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Images
The product image is missing!
Details

Lenco Heavy Duty Performance Trim Tab Kit w/Standard Switch Kit - 12" x 12"

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 38ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Item No. 348893
$854.99 $899.99
Save $45.00 ( 5% Off )
Free Shipping
Product Actions

This item is currently not available.

Additional Information
Built to withstand aggressive boating in the open sea, Lenco Heavy Duty Performance Trim Tabs feature full transom back plates for reliability. Adjustable mounting channels with through bolted actuators and stainless steel billet ends offer versatility without losing strength. Actuator speed is precise and controllable so there are no surprises at top speeds. Thermoplastic actuator housing is made from a UV-resistant nylon that is 50 % glass fiber reinforced. Electro-polished blades and back plates are made from 12-gauge 304 stainless steel. Lenco electric trim tab kits draw only 5 amps. Kits are offered without a switch kit, with a Standard Tactile Switch Kit, or with an LED Indicator Tactile Switch Kit. 5/16" mounting hardware required (not included). 12V.

Kit Includes:
• 2 Actuators w/6' leads and Deutsch plugs
• 2 Blades, pre-assembled with back plates and gland seals
• Two 20' Actuator extension wiring harnesses

Lenco 101XD Actuator - Lenco Actuators are fully submersible, maintenance-free, and sealed for life. Extreme Duty model has a solid stainless steel billet end. Freely rotating ballscrew with 12 ball bearing at both ends of its stroke eliminates the need for limit switches and clutches. High quality components and design contribute to Lenco Actuators' long life and high strength.
• 12V
• 2-1/4" stroke
• 11-3/8" long overall
• 5/16" hardware required
• Stainless steel billet end
• Stainless steel ram
• Double O-ring
• Self-locking ballscrew
• Precision molded metal alloy gears
• High-torque motor that transfers 750 lbs.
• UV-resistant nylon, 50% glass fiber reinforced for a thermoplastic housing
• Top cap gland seal protecting outer cable jacket and internal conductors
• 6' leads with Deutsch connectors

Standard Blade - Pre-assembled backplates and 10"H with gland seals. Center channel for adjusting actuator.
• 12-gauge 304 stainless steel
• Electro-Polished
• 1" turned up edges
• 2" taper on inside

Lenco Standard Tactile Switch Kit - Raise and lower your port and starboard bows with two simple tactile switch trim tab controls. A built-in retracting feature automatically returns tabs to a fully retracted position when power or tach signal is removed. Waterproof kit has self-contained, sealed keypad and control box.
• Fade/smuge-proof laser engraved graphics
• Plug & play switch wiring harness connector
• 2-3/4" x 2-3/4" keypad
• Solid state control box with Deutsch connections
• Includes 36" power pigtail
Show moreShow less
  • Stainless steel backplates pre-assembled to blades
  • Adjsutable mounting channels w/thru-bolts
  • Extreme Duty Actuator w/stainless steel billet end
  • (2) 20' actuator extension wiring harnesses
  • Includes Standard Tactile Switch Kit
Unit Weight 0.00 lb
Brand Lenco Marine
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getReviews, 36ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getContent, 60ms
  • questions, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};