Marinco ConnectPro Receptacle And Plug, 3-Wire
Item No. 317372
Marinco ConnectPro Receptacle And Plug, 3-Wire is rated
out of
5 by
1.
Details
https://www.campingworld.com/marinco-connectpro-receptacle-and-plug-3-wire-317372.html
Marinco ConnectPro Receptacle And Plug, 3-Wire
$37.99
$39.99
Compare at $47.99
Save $2.00
(
5% Off
)
Additional Information
Features
The ConnectPro system features locking plug and receptacle and spring clamping connection to provide a secure electrical contact. Features watertight sealing cap and corrosion-resistant, plated brass electrical components with drain holes in receptacle. Standard 1-1/8" diameter mounting hole accepts up to 8-gauge wire. Comes with mounting plate. Plug has O-ring seal for waterproof connections and weather-resistant plug cover. Accepts 16 to 8-gauge wire.
Show moreShow less
- Locking plug and receptacle
- Secure electrical contact
- Watertight seals
Specs
Unit Weight | 0.36 lb |
---|---|
Brand | Marinco |

WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
The ConnectPro system features locking plug and receptacle and spring clamping connection to provide a secure electrical contact. Features watertight sealing cap and corrosion-resistant, plated brass electrical components with drain holes in receptacle. Standard 1-1/8" diameter mounting hole accepts up to 8-gauge wire. Comes with mounting plate. Plug has O-ring seal for waterproof connections and weather-resistant plug cover. Accepts 16 to 8-gauge wire.
Show moreShow less
- Locking plug and receptacle
- Secure electrical contact
- Watertight seals
Unit Weight | 0.36 lb |
---|---|
Brand | Marinco |

WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Rated 3 out of
5
by
chaspark from
Poor nut fit.
The electrical design and function is excellent and worth a 5 star rating but the mounting system is poor resulting in my 3 star rating. The plastic retaining nut has too loose a fit to the plastic receptacle dash mount. it can not be tightened enough to twist the plug to lock it in place without rotating the receptacle. This can be corrected by wrapping the receptacle threads with Teflon plumbing tape and placing a 1-1/8" lock washer under the nut. A better solution would be for the manufacturer to design a better fit nut.
Date published: 2020-01-22