Master Mount Locking Cantilever Mount, Small
Item No. 51564
Details

Master Mount Locking Cantilever Mount, Small

Master Mount Locking Cantilever Mount, Small is rated 4.5 out of 5 by 39.
  • y_2019, m_3, d_18, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_39
  • loc_en_US, sid_51564, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_campingworld
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 103ms
  • reviews, product
Item No. 51564
$59.97 $77.99
Product Actions

In Stock

Promotions
Additional Information
This locking cantilever mount locks your flat-screen TV securely against the wall with a spring-loaded locking pin and pull-chain lock release. Especially designed for LCD screens that are mounted in moving vehicles. Made from cast aluminum and steel for reliable durability. Articulating arm extends up to 16-1/2" from the wall. Holds screen sizes up to 30" and up to 25 lbs. Tilt: 15° down; 10° up; 25° overall.
Show moreShow less
  • Locking cantilever mount for flat-screen TVs
  • Keeps TV securely against the wall
  • Great for use in moving vehicles
  • Cast aluminum and steel construction
  • Master Mount Locking Cantilever Mount, Small is rated 4.5 out of 5 by 39.
    Rated 3 out of 5 by from good idea but doesn't secure the tv 24 samsung monitor with hdtv tuner. i work for an a/v company and install tv's on a daily bases. i have plenty of small mounts like this laying at the shop that available to me for very cheap. at the time i spent i think around 100 dollars for this mount. i really like the idea of locking the mount in place. the only problem is once locked in place the arm still swings in and out and theyre is no way to tighten the bolts to try and counter- act this. i ended up fabricating some blocking to hold the arm in place during transport. this completely killed the whole idea of this mount. now i have to loosen the block then pull the cord.
    Date published: 2013-04-24
    Rated 4 out of 5 by from Locking Cantilever Mount I purchased this to mount a 19 TV/VCR Comb in a Wolf Creek 850 Camper. (It would work great for a 21 tv combo in a truck camper as well - I wish I would have bought a bigger TV) The unit works very well. It allows viewing of the TV both in the main seating area or the bed area as it will easliy adjust to view from either area. It locks down tight to the wall very easily and securily for travel. This would work well to mount a TV in any truck camper where room is at a premium. Dont buy the cheaper mounts as this one is heavy duty and is specifically built for RV's. Would buy again without question!
    Date published: 2012-12-04
    Rated 3 out of 5 by from Looks are not everything This mount is possibly the best looking one on the market; no complaints there. The problem comes after a few miles of use. The moveable arms are fitted with loose bushings. If the TV is left secured to the fixture it is level, when the arms are extended, the TV hangs tilted to the right. I cannot see any way to fix it; except to say I would have been happy to spend more if the manufacturer had installed precision or tight bushings at the pivot points.Too bad I do not have more wall space, I could have bought a stationary tilt mount - Another thing to think about in the next TT.
    Date published: 2011-04-29
    Rated 5 out of 5 by from Quality made, easy install & rock solid I bought this mount to relocate the TV in our 31' 2012 Winnebago Chalet Class C to allow for viewing from the front cabin or from the overcab bunk. Now the grandkids can watch videos while en route without distracting the driver & passenger up front. Once parked, just swing it around for viewing from the front cabin (if you can pull yourself away from our phenominal scenery here!) This mount has proven itself to be solid and durable despite some of our rugged Alaskan roads. Stows and locks easily and all of the pivot arms are adjustable to get the right amount of friction that you desire for movement. So pleased with it that I bought another one to install in the back bedroom as well - very satisfied and would highly recommend.
    Date published: 2013-06-27
    Rated 5 out of 5 by from Works Great! Happy I finally found this mount After trying some other cantilever mounts that did not lock, I found this one at Camping World. It works perfect. It pulls out, tilts and swivels to get the perfect viewing angle. Best of all, you push it back against the wall or cabinet in my case and it locks in place. It is a very solid lock and the TV will not move until you pull a release strap. I highly recommend this mount. Now that I know this mount works so well I am planning to put another TV in my camper. Thank you Camping World!
    Date published: 2013-05-02
    Rated 3 out of 5 by from Right Price, Right Functions, Underbuilt We purchased this mount for a 26 LCD for our 2010 Keystone Sprinter where we needed full motion mount to improve the picture Quality. While this mount has everything important to RV World, with the locking Mechanisim and full motion, it fell short on Quality. Mount Arms when extended do and will hold as advertised but the joints sag and when you attempt to lock for travel you know have to Lift LCD to get it back onto the Locking Position. The Chain to unlock and relock is as delicate as my wifes jewlery and broke first day out. Now I have replaced the chain with something more strong, and lifting back onto the docking position is simple, it should be improved. Now based on cost, you get what you pay for. I am still happy with the mount in this regard as the nearest option was $200.00, so all in all not bad not good but is workable.
    Date published: 2011-04-01
    Rated 5 out of 5 by from Insallation recommendation With respect to comment on middle screw hole partially hidden. I'd noticed this in the picture and was concerned. However, there are four set screws that can be loosened with included allen wrench and the arm removed. Then mount the wall support using the two bottom screws, slide the arm back in the support, tighten the set screws and finally install the top mounting screw.
    Date published: 2015-04-19
    Rated 2 out of 5 by from Not a good RV mount I purchased the RV mount on 05/08/16. I installed according to instructions and I was hoping that it would fully lock in position when traveling. The only part that locks is the extension arm, the TV is still free to flop around and turn back and forth. I will be returning the TV mount for something a bit more heavy duty and better made for traveling.
    Date published: 2016-05-10
    • y_2019, m_3, d_18, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_39
    • loc_en_US, sid_51564, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_campingworld
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 8ms
    • reviews, product

    Will this mounting bracket work with the Furrion LED RV HDTV with DVD Player (Item # 89510)?

    Asked by: Anonymous
    Yes, SKU#89510 (Furrion FEHD19S0A) is compatible as the TV uses a 100x100 VESA pattern and weighs less than 10 lbs.
    Answered by: cw_staff
    Date published: 2019-03-08

    Will this fit a 40" TV that weighs 15.56lbs?

    Asked by: Jamie
    Mount limits: Screen Sizes: Up to 30" Weight Capacity: 25 pounds
    Answered by: cw_staff
    Date published: 2019-03-08

    location

    have a area in master bedroom where you can put a tv but this area also has sliding bedroom doors blocking it when open. can this be mounted inside the cut out that is to provide a tv. There is a tv mounted on the living area side of this wall
    Asked by: Anonymous
    If there is a stud for the this TV mount to install to and the TV its self can fit in the cutout, yes.
    Answered by: cw_staff
    Date published: 2019-03-08

    does is item tilt down?

    Asked by: Jdeflow
    Tilt - 15 Deg. down - 10 Deg. up
    Answered by: cw_staff
    Date published: 2019-03-08

    How tall is the vertical piece that attaches to the wall?

    Asked by: Anonymous
    Wall plate dimensions: H 7" x W4.5" x D .75"
    Answered by: cw_staff
    Date published: 2019-03-08

    Is that a corner bracket where it mounts or is it for a flat wall

    Asked by: Anonymous
    The mounting plate is for a flat surface, not a corner.
    Answered by: cw_staff
    Date published: 2019-03-08

    How long are the mounting screws?

    Asked by: Terry
    The length of the screw is 2 1/4" from the base of the head to the tip of the screw.
    Answered by: cw_staff
    Date published: 2019-03-08

    Can this be used with a 29 LED tv in my living quarter horse trailer?

    I'm upgrading from a LCD tv to the LED and would like to replace the current mounting bracket because it doesn't lock in place for traveling.
    Asked by: Horse Girl
    This item can be used on mountable TVs up to 30" and no more than 25 lbs.
    Answered by: cw_staff
    Date published: 2019-03-08
    • y_2019, m_3, d_18, h_23CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_18
    • loc_en_US, sid_51564, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_campingworld
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 86ms
    • questions, product