Power board - Micro P-7-11
The MICRO P-711 is designed as a replacement for most of Dometic's existing "Black box boards". This board has an improved thermocouple circuit to eliminate the "Recurring check light" problem. The board comes as a 2-way and can be used as a 3-way by adding the supplied fuse. It is fuse protected on the 12VDC, DC element circuit, and 120VAC circuit. A food saver feature keeps the refrigerator operating if the eyebrow board communications link fails. A knob on the circuit board allows you to fine-tune the temperature of units equipped with a temp selector, and allows you to choose from the full temperature range even with fixed temp refigerators. Complete instructions makes installing this circuit board simple, all connections are clearly marked. This board works with or without the "Ground problem" wiring kit.WORKS WITH THE FOLLOWING MODELS: NDR 1062, NDR 1272, NDR 1282, NDR 1492, RM 2551, RM 2554, RM 2607, RM 2611, RM 2612, RM 2620, RM 2652, RM 2807, RM 2811, RM 2812, RM 2820, RM 2825, RM 3607, RM 3662, RM 3663, RM 3807, RM 3862, RM 3863, RM 4872, RM 4873, RM 7030, RM 7732, RM 7832, S1521, S1531, S1621, S1631, S1821, S1831, and there may be more.*Warning: The Micro P-711 CANNOT replace any Black Box Board part number that starts with "385"! You must identify the part number of the physical board that is actually in your refrigerator now! Failure to do so can result in getting the wrong board! Please look on the black cover or under the black cover for a part number that begins with "385 or "293".