Powered C Jack Kit
Item No. 104652
Images
Details
https://www.campingworld.com/powered-c-jack-kit-104652.html
Powered C Jack Kit
$417.99
$464.99
Save $47.00
(
10% Off
)
Additional Information
Features
Dual, 12-volt motor stabilizing system allows independent operation of jacks using two separate switches.
Stabilize each corner of your trailer as opposed to being restricted to operating two jacks at one time. Push button for quick, quiet extension & retraction. 25” leg length. Simple bolt-on installation for new applications or retrofits most OEM single 12-volt motor cross-frame stabilizers. Superior E-Coat finish assures years of durability. Made in USA.
Show moreShow less
Stabilize each corner of your trailer as opposed to being restricted to operating two jacks at one time. Push button for quick, quiet extension & retraction. 25” leg length. Simple bolt-on installation for new applications or retrofits most OEM single 12-volt motor cross-frame stabilizers. Superior E-Coat finish assures years of durability. Made in USA.
Specs
| Jack Type | Electric |
|---|---|
| Lift | 25.00 in |
| Unit Weight | 44.00 lb |
| Brand | BAL |
| MFG Part No. | 21100005 |
Reviews
Q & A
Dual, 12-volt motor stabilizing system allows independent operation of jacks using two separate switches.
Stabilize each corner of your trailer as opposed to being restricted to operating two jacks at one time. Push button for quick, quiet extension & retraction. 25” leg length. Simple bolt-on installation for new applications or retrofits most OEM single 12-volt motor cross-frame stabilizers. Superior E-Coat finish assures years of durability. Made in USA.
Show moreShow less
Stabilize each corner of your trailer as opposed to being restricted to operating two jacks at one time. Push button for quick, quiet extension & retraction. 25” leg length. Simple bolt-on installation for new applications or retrofits most OEM single 12-volt motor cross-frame stabilizers. Superior E-Coat finish assures years of durability. Made in USA.
| Jack Type | Electric |
|---|---|
| Lift | 25.00 in |
| Unit Weight | 44.00 lb |
| Brand | BAL |
| MFG Part No. | 21100005 |
I have a 07 Jayco Feather sport 197 will they fit in the rear of my trailer?
It will depend on dimensions/available space under the camper. BAL Powered ‘C’ Type Stabilizing Jacks are designed to mount to the bottom of the trailer frame that allows for a minimum of 8” surface of unobstructed mounting location on each side of the trailer. The Jack assembly will fit on trailer frame widths of 66.5” to 70.5”. Each individual C-Jack has a static load capacity of 4,000 lbs.
Date published: 2020-04-17
I have 2017 Freedom Express 246RKS, can I replace my stabilizers jacks with this product or do I have to keep them, TKS
Yes, this kit can be used to substitute a set of stabilizer scissor jacks.
Date published: 2020-03-25
We have a Rockwood 2018 HW277 Pop Up Camper. Can we use these for electric stabilizer jacks?
It will depend on dimensions/available space under the camper. BAL Powered ‘C’ Type Stabilizing Jacks are designed to mount to the bottom of the trailer frame that allows for a minimum of 8” surface of unobstructed mounting location on each side of the trailer. The Jack assembly will fit on trailer frame widths of 66.5” to 70.5”.
Date published: 2020-03-03
Does this come with a control switch?
Yes, switches are included.
Date published: 2020-03-03
what is the frame width does this fit?
What is the width or lengrh of. These?
Date published: 2020-02-03
I am looking to add stabalizers to my 80's model 30ft Coachmen camper trailer. I know how to run the electric but I was wondering if these stabilizers are heavy duty enough to use? It is a heavy camper since it is the older model.
Each c-jack in this kit has a load capacity of 4,000 lbs., as you are not actually lifting the gross weight of the trailer these stabilizers should not have any problems being used on your trailer.
Date published: 2019-09-18
is this compatible with class c motor home, jayco 26xd
No, this jack kit is intended for travel trailer and 5th wheel trailer use.
Date published: 2019-05-09
do these automatic jacks have to be used on level ground? some of the places i camp it isnt 100% level. i use blocks now to try and make the ground level. but can i be an inch or so off?
This kit is a dual motor configuration, each jack can be independently controlled. This allows for more flexibility when on uneven terrain, but blocks may still be necessary depending on how severe the unevenness is.
Date published: 2019-06-14