Qwik-Fill Dual 12-Volt Battery Watering System
Item No. 27037
Qwik-Fill Dual 12-Volt Battery Watering System is rated
out of
5 by
13.
Images
Details
https://www.campingworld.com/qwik-fill-dual-12-volt-battery-watering-system-27037.html
Qwik-Fill Dual 12-Volt Battery Watering System
$66.99
Additional Information
Features
Remote battery watering systems let you fill all batteries to proper electrolyte levels from a single fill tube, using a simple hand pump (sold separately).
Safer and more accurate than conventional filling. Install in minutes without tools. Just replace the battery caps with the valve manifolds connected with flexible tubing. Automatically sends water only to low cells. Automatic shut-off at each cell prevents over-fill. Provides electrolyte level accuracy to 1/8". Makes maintaining proper electrolyte levels in hard-to-reach batteries easy, improving battery life and performance and preventing dangerous acid bubble-out during charging. Flame arrestors prevent external spark or flame from igniting flammable cell gasses. Pumps work with any distilled water container. Reusable systems can be installed on new batteries when old batteries are replaced. USA.
Show moreShow less
Safer and more accurate than conventional filling. Install in minutes without tools. Just replace the battery caps with the valve manifolds connected with flexible tubing. Automatically sends water only to low cells. Automatic shut-off at each cell prevents over-fill. Provides electrolyte level accuracy to 1/8". Makes maintaining proper electrolyte levels in hard-to-reach batteries easy, improving battery life and performance and preventing dangerous acid bubble-out during charging. Flame arrestors prevent external spark or flame from igniting flammable cell gasses. Pumps work with any distilled water container. Reusable systems can be installed on new batteries when old batteries are replaced. USA.
Specs
| Unit Weight | 0.80 lb |
|---|---|
| Brand | Flow-Rite Controls |
| MFG Part No. | MP-2000 |
Reviews
Q & A
Remote battery watering systems let you fill all batteries to proper electrolyte levels from a single fill tube, using a simple hand pump (sold separately).
Safer and more accurate than conventional filling. Install in minutes without tools. Just replace the battery caps with the valve manifolds connected with flexible tubing. Automatically sends water only to low cells. Automatic shut-off at each cell prevents over-fill. Provides electrolyte level accuracy to 1/8". Makes maintaining proper electrolyte levels in hard-to-reach batteries easy, improving battery life and performance and preventing dangerous acid bubble-out during charging. Flame arrestors prevent external spark or flame from igniting flammable cell gasses. Pumps work with any distilled water container. Reusable systems can be installed on new batteries when old batteries are replaced. USA.
Show moreShow less
Safer and more accurate than conventional filling. Install in minutes without tools. Just replace the battery caps with the valve manifolds connected with flexible tubing. Automatically sends water only to low cells. Automatic shut-off at each cell prevents over-fill. Provides electrolyte level accuracy to 1/8". Makes maintaining proper electrolyte levels in hard-to-reach batteries easy, improving battery life and performance and preventing dangerous acid bubble-out during charging. Flame arrestors prevent external spark or flame from igniting flammable cell gasses. Pumps work with any distilled water container. Reusable systems can be installed on new batteries when old batteries are replaced. USA.
| Unit Weight | 0.80 lb |
|---|---|
| Brand | Flow-Rite Controls |
| MFG Part No. | MP-2000 |
Rated 5 out of
5
by
Heavyiron from
A Brilliant Device
This is a very simple system to install and it really works. There are two deep cycle 12 volt batteries in a cargo compartment under our RV. One is located so far inside that even though I could remove the cell caps, no way could I add water to the cells let alone inspect the water levels. The battery fill system is the right device to fix this problem. Once installed, water can be simultaneously be pumped into the cells of two batteries to the proper fill level. Check valves in each of the cells then close and prevent the batteries from being overfilled and serve as the new cell caps. A brilliant device well worth the money and piece of mind to maintain your batteries and extend their life.
Date published: 2019-11-13
Rated 5 out of
5
by
Acrub175 from
Simple to install, simple to maintain battery.
Installation was pretty simple, the most difficult part was removing some of the caps due to battery cable placement from the factory. Don’t forget to order the bulb that is sold separately. I read a tip from another forum that stated to use a piece of clear tubing, that is provided, on the end cell and use that tube as a way to ensure distilled water has been added to each cell. The instructions state to use the red cap on the end cell. When you see distilled water exit the last cell and into the tube you will have filled all the cells. The instructions state to pump distilled water until the bulb is hard to squeeze, from the deadhead condition created with the end cell red cap. When finished I removed the fill line and overflow line and installed the red caps.
Date published: 2019-06-09
Rated 5 out of
5
by
Larry from
Qwik-Fill Dual 12-Volt Battery Watering
With the very tight space in the battery drawer, it is almost impossible to get water in the last cell on each battery. Once you manuever this system into place, the topping off of water in all cells becomes very easy.
Date published: 2012-12-14
Rated 4 out of
5
by
Doc Popper from
Works well but a bit pricey.
Essential for hard to reach battery maintenance. Works well.
Date published: 2019-07-26
Rated 5 out of
5
by
Robert from
Had to have it !!!
I had a 4-battery 6v watering system that served us well for 15 years. So when we got a newer class A, I put the watering system on my must-have list. It works great and is easy to install. No worries.
Date published: 2019-08-18
Rated 5 out of
5
by
Don A from
Great Battery Accessory
Great product to allow you to maintain the proper water levels in your battery cells without having to pull your batteries out of the tight quarters.
Date published: 2019-07-21
Rated 5 out of
5
by
Viking Ken from
12 volt watering system
Easy to install. Very handy. Don’t forget to buy the pump separately.
Date published: 2020-05-17
I have the QUICK Fill set up and one of the filler lines fell down and out of the battery area and dragged on the road. The connector for the hose to pump was destroyed. How can I get a replacement?
I would recommend reaching out to the manufacturer, Flow-Rite Controls, directly.
Date published: 2020-04-20
Batteries on different level?
My batteries are on slide out trays, one above the other. Does it matter if the batteries are on two different levels from each other? In the pictures of these type systems the batteries are on the same level.
The batteries need to be level.
Date published: 2019-03-08
I have 42 foot boat with 8 batteries located in different areas of boats, how many batteries should you connect together?
With the Qwik-Fill system, the manufacturer recommends plumbing no more than 3 batteries together.
Date published: 2019-03-08
Which bulb pump do I need for this qwik fill system
Use <https://www.campingworld.com/pro-fill-handy-pump>SKU#27036</a>.
Date published: 2019-03-08
I have the Pro Fill for 6 volt will the pump quick connect fit the Quick-Fill 12 volt System?
Yes, the pump used on the 6V system can be used for the 12V watering system.
Date published: 2019-03-08
Can this be used for 4 six volt batteries?
No, it fits all 12-volt flooded lead acid batteries in group sizes 24 through 31 with standard 3-cell + 3-cell spacing of 1 5/8" center-to-center.
Date published: 2019-03-08
Where do I find the bulb filler (hand pump) required?
See item 27036.
Date published: 2019-03-08
Is there enough tubing to connect the two batteries if they are end to end?
This kit includes 4' of tubing.
Date published: 2019-03-08