Ronix Kinetik Project Flexbox 1 Wakeboard, Blank

Dominik Hernler's pro model is a board that has a continuous flex from tip to tail and rail to rail. The Kinetik Project offers greater durability and reduced friction on the water with its signature Speedwalls. Ronix took their best-selling series and replaced the foam with wood and, most importantly, added Flexbox 1 in the center of the wakeboard. Thru testing Ronix found that this model has more of a solid snap off of kickers, and works better for air tricks because a rider needs added support when they flick off the end of the board.

Flexbox 1
Modified flex zone on the board that caters to the riders who like a softer mid section, which allows the center of the board to really bend into a press. Once in a press, the slightly stiffer tip/tail lets the rider really pivot off the feature.

Monocoque Construction: Integrating the top glass and the bottom glass into one creates a more durable board on side impacts, thus preventing delamination.

G & R Technology: Grip and Release channels have all the traction you need for riding behind the boat or in the cable park. They also add side-to-side stability, allowing you to control a flick easier without unwanted drag in the water.

Speedwalls: Vertically poured urethane creates ore top water speed and a durable bumper from those floating menaces at a cable park. These rails ride higher on the water and alleviate strain on your body.

Sintered Base: The most durable non-stick base material that's designed to increase glide speed on the water. Formulated from a powder by heating the material to temperatures where the particles bonded together. This higher purity compound preserves its bond over time.

Kinetik Project 138:
54.3"L
Center Width: 16.9"
Total Surface Area: 814"
Rocker Height: 2.7"
Stance Options: 23" - 27"
For riders up to 175 lbs.

Kinetik Project 144:
56.7"L
Center Width: 17.1"
Total Surface Area: 846"
Rocker Height: 2.8"
Stance Options: 24" - 28"
For riders over 145 lbs.