Bought this because of the good reviews. Got the item and had it installed in about 20 minutes. I have a 99 Fleetwood Flair with a... Dometic fridge. Unit comes with new screws and fits great using the holes indicated in the directions. Seems to be a much sturdier unit than what was on my RV. Would recommend this replacement to anyone!!
I operate a RV rental business, mostly class A coaches, and have purchased two of
these at different times this year, both were ...perfect fits for both coaches, worked great
with the screws included and installation was a quick 10 minute job, can be done from
roof or ladder on side of coach. Would highly recommend to anyone. Much better than
what came on these two coaches.
These screws go flush with
the surface - I didn't see a reason to caulk. A 3/16th
drill is necessary. Material too think to punc...h through.
After old cover removed, and after holes are drilled, its a
5 minute job to install. Holes marked with N or D for which
brand of refrigerator you have.
This cover was purchased to replace one which had become fragile and broken due to UV exposure. While the overall size was than t...he previous one, the screw areas aligned with the the base perfectly so it was: put the screws in and go. This fit on a Dometic refrigerator. There were also additional pieces included which allowed it to be adjusted
for other screw patterns. Looks very nice.
Very easy to install took 5 minutes to replace old weatherbeaten cover with shiny new one.I would highly recomend this product it ...took just a few minutes to remove an eye sore that took mother nature over a decade to destroy.
This cover fit perfectly. Didn't need the retrofit pcs. that came with it, but i must say to
have them handy just in case was a... relief when i opened the box. Had it installed in less
than 15 minutes.
This is a far more durable and flexible fridge vent than the original. The original plastic was
thin and had become brittle form... the UV exposure. This is made from a much thicker, high
density polypropylene.... much stronger and shouldn't get brittle with time.
I got this cover because I never saw that tree limb hanging
down- my old cover was very dried out from the sun and
cracked easy.... This new one is stronger and better looking.
It was so easy to screw on and fit perfectly on my 2000
Fleetwood Flair with a domestic fridge. It took me maybe 15
minutes to get my old one off and the new one on. The screw
holes lined up perfect.
This looked nothing like what remained of my old vent cover so I was hesitant to buy it as a replacement. It took about 10 minutes... to install. Four screws out and four screws in. Add sealant under the 4 screws before tightening them down and I was done. Looks and fits great.
I bought this because my old one looked terrible and was brittle, this vent cover is so easy
to install, a caveman could do it. ...You get everything you need to install and only takes about
10 minutes! I also received it within 3 days of ordering it from Camping World.com. It is
made of better construction and I know it will last longer than the old one.
Following the wind storm in Ontario a branch cracked the old vent cover. I ordered this
one as a replacement. Only took 30 minut...es (if that) to install and it fit like a glove, The
hardest part was getting the holes in the base to line up. Once I got one in place the rest
were a snap. It seems like a lot heavier material than old and sure looks a lot better.
It was very easy to install. It took me less than 5 minutes to remove the old and install the new one right before a trip. It look...s great and seems to be made out of a better material than the factory one.
It may be possible to do so, however the roof vent is a raised base and the screws for this cover is mounted downwards through the top of this replacement cover into the vent.
by Camping World – July 27, 2015
Fit would depend on the make and model of your refrigerator as opposed to your RV make/model. This vent cover fits Dometic, Camco and newer Norcold fridge vent bases.
by Camping World – October 16, 2015
If the dimensions of the screw hole are 4-1/4" x 21-7/8", no that is not a standard dimensions. However, if 4-1/4" x 21-7/8" is the spacing of the screw holes, yes that would be typical for a rooftop fridge vent.
by Camping World – October 15, 2015
This is designed to work with Dometic bases, yes.
by Camping World – October 01, 2013
I'm wondering if this cover is universal?
by Pam – July 06, 2013
July 06, 2013
I have an older 1996 Wildwood trailer the refrigerater is Norcold it doesnt look like the old one I have that is cracked. The measurements and 4 screw holes are about the same. I have no idea of model numbers.
Per the manufacturer, this will work with Norcold models from 1993 to current.
by Camping World – December 26, 2012
Ask Your Question
RV Refrigerator Vent Cover - White
Replace your old, cracked refrigerator vent cover.
Replace your old, cracked refrigerator vent cover.
Enter Your Question:
Have a question about customer service?
If you wish to share feedback with us about product selection, pricing, ordering, delivery or other customer service issues,
please do not submit this feedback through the Question & Answer Service.
Please contact Customer Service at 1-888-626-7576.
Your email address will ONLY be used to notify you regarding your question.