Additional Information
Features
Replace your damaged or missing fridge vent cover with this Camco RV Refrigerator Vent Cover. Fits Dometic, Camco, and newer Norcold bases.
Specifications:
Show moreShow less
Specifications:
- Weight: 2.25 lbs.
- Manufacturer: Camco Mfg., Inc.
- Model#: 42160
- Replacement for damaged/missing fridge vent cover
- Fits Dometic, Camco, and newer Norcold bases
Specs
Unit Weight | 2.25 lb |
---|---|
Brand | Camco |
MFG Part No. | 42160 |
Reviews
Q & A
Replace your damaged or missing fridge vent cover with this Camco RV Refrigerator Vent Cover. Fits Dometic, Camco, and newer Norcold bases.
Specifications:
Show moreShow less
Specifications:
- Weight: 2.25 lbs.
- Manufacturer: Camco Mfg., Inc.
- Model#: 42160
- Replacement for damaged/missing fridge vent cover
- Fits Dometic, Camco, and newer Norcold bases
Unit Weight | 2.25 lb |
---|---|
Brand | Camco |
MFG Part No. | 42160 |
Rated 5 out of
5
by
Mike in St Paul from
Fast and easy installation!!
Bought this because of the good reviews. Got the item and had it installed in about 20 minutes. I have a 99 Fleetwood Flair with a Dometic fridge. Unit comes with new screws and fits great using the holes indicated in the directions. Seems to be a much sturdier unit than what was on my RV. Would recommend this replacement to anyone!!
Date published: 2012-06-21
Rated 5 out of
5
by
DrSHunley from
Drop in Replacement
This cover was purchased to replace one which had become fragile and broken due to UV exposure. While the overall size was than the previous one, the screw areas aligned with the the base perfectly so it was: put the screws in and go. This fit on a Dometic refrigerator. There were also additional pieces included which allowed it to be adjusted
for other screw patterns. Looks very nice.
Date published: 2012-05-10
Rated 5 out of
5
by
Michael Hall from
Second one purchasede
I operate a RV rental business, mostly class A coaches, and have purchased two of
these at different times this year, both were perfect fits for both coaches, worked great
with the screws included and installation was a quick 10 minute job, can be done from
roof or ladder on side of coach. Would highly recommend to anyone. Much better than
what came on these two coaches.
Date published: 2013-11-20
Rated 5 out of
5
by
S-Van from
Easy and Quick to install
These screws go flush with
the surface - I didn't see a reason to caulk. A 3/16th
drill is necessary. Material too think to punch through.
After old cover removed, and after holes are drilled, its a
5 minute job to install. Holes marked with N or D for which
brand of refrigerator you have.
Date published: 2014-07-21
Rated 5 out of
5
by
Jette from
Fridge vent cover for motorhome
I got this cover because I never saw that tree limb hanging
down- my old cover was very dried out from the sun and
cracked easy. This new one is stronger and better looking.
It was so easy to screw on and fit perfectly on my 2000
Fleetwood Flair with a domestic fridge. It took me maybe 15
minutes to get my old one off and the new one on. The screw
holes lined up perfect.
Date published: 2013-12-04
Rated 5 out of
5
by
Joseph Woolsey from
Fantastic Product
Following the wind storm in Ontario a branch cracked the old vent cover. I ordered this
one as a replacement. Only took 30 minutes (if that) to install and it fit like a glove, The
hardest part was getting the holes in the base to line up. Once I got one in place the rest
were a snap. It seems like a lot heavier material than old and sure looks a lot better.
Date published: 2014-04-21
Rated 5 out of
5
by
Rob Krawl from
RV Fridge Vent Cover
I bought this because my old one looked terrible and was brittle, this vent cover is so easy
to install, a caveman could do it. You get everything you need to install and only takes about
10 minutes! I also received it within 3 days of ordering it from Camping World.com. It is
made of better construction and I know it will last longer than the old one.
Date published: 2014-04-30
Rated 5 out of
5
by
Chuck from
Good retrofit
This looked nothing like what remained of my old vent cover so I was hesitant to buy it as a replacement. It took about 10 minutes to install. Four screws out and four screws in. Add sealant under the 4 screws before tightening them down and I was done. Looks and fits great.
Date published: 2012-09-28
I have a domestic fridge. The vent cover is blunt on one end and aerodynamic in shape on other end. Which way is it installed? Aero forward or blunt forward?
I would recommend reaching out to Camco about this directly.
Date published: 2020-04-16
Will this fit a 1997 Ford E350 RV? I have the Norcold Frig. Thank You
It is highly recommended that mount holes on the refrigerator vent base be measured. This cover has two mount patterns available, 23-3/8" x 4" and 21-7/8" x 4-5/16".
Date published: 2020-03-10
will this cover fit a RM2612 Dometic
As your RV most likely has a Dometic manufactured refrigerator vent, yes this cover by Camco can be used to replace the original cover.
Date published: 2020-10-06
Will it work with an older Dometic- a model RM 2410 installed in a '98 Northwoods Camper? Thank you!
This vent cover is most likely to fit. The most accurate way is to measure the mount holes on the vent base. This cover has two mount patterns available, 23-3/8" x 4" and 21-7/8" x 4-5/16".
Date published: 2019-08-13
how long is it and how wide is it
Dimensions: 32-1/2"L x 10"W x 3-3/8"H
Date published: 2019-08-13
will this fit my atwood he-0601? vent part number was 13004
No, this cover will not fit a refrigerator vent base made by Atwood.
Date published: 2019-07-03
Will it fit 1989 Sprinter class C, Norcold...............
This vent cover only fits Dometic, Camco and newer Norcold bases.
Date published: 2019-03-08
Does it come with the base?
No, the base is not included. If a base needs to be replaced as well, we have one listed as <a href=https://www.campingworld.com/refrigerator-vent-base-black>SKU#84119</a>.
Date published: 2019-08-26