ScanGauge II

Catalog Item # 55455 Members Only Special

The ScanGaugeII is an extremely compact automotive computer designed to read and display information about your vehicle in real time.

Simply connect the ScanGaugeII to your vehicle through it's OBDII port using the included cable, turn the ignition key and the ScanGaugeII automatically connects to your cars internal computer - it's that simple.
Automatically tracks four sets of trip data - Each with 11 individually stored parameters.

  • Maximum Speed
  • Average Speed
  • Maximum Coolant Temperature
  • Maximum RPM
  • Driving Time
  • Driving Distance
  • Fuel Used
  • Trip Fuel Economy
  • Distance to Empty
  • Time to Empty
  • Fuel to Empty
    Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!
  • Fuel Economy
  • Fuel Rate
  • Battery Voltage
  • Coolant Temperature
  • Intake Air Temperature
  • Engine Speed (RPM)
  • Vehicle speed (MPH)
  • Manifold Pressure (not available on some vehicles)
  • Engine Load
  • Throttle Position
  • Ignition Timing
  • Open/Closed Loop
    The ScanGaugeII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the “Check Engine” light and avoid those costly trips to the mechanic.
  • Reads Trouble Codes
  • Reads conditions that set the Trouble Code
  • Clears Trouble Codes
  • Turns off the "Check Engine" light
  • Tells you when vehicle is "Ready" to pass OBDII testing
  • Make and store up to 10 rewritable special codes to send to the vehicle computer

    Here's a video on the setup of the ScanGauge II

  • Technical Specifications

    Less than 1 lb.
    Compact Size - just 4.8"W x 1.5"H x 1"D

    Camper's Choice Rating

    Reviewer rating of 5 stars based on 14 reviews (5 Based on 14 Reviews)

    Add A Review

    ScanGauge ii

    by Michael Edginton – July 10, 2011
    3 out of 5 stars

    Bought it for a 2009 Winnego Adventure, ford v-10, couldn't get it to communicate so I tried it on my 2004 nisson frontiere and it

    Works As Advertised

    by GaryKD – January 24, 2014
    5 out of 5 stars

    This product works as advertised and I would make the same purchase again. The unit is easy to install and use. It provides the

    Scan Guage 11

    by Bill – December 09, 2013
    5 out of 5 stars

    East to operate. Tells me what I need to know about my vehicle. Perfect for giving me my MPG when off roading.

    Excellent Gauge

    by Ken Barnes – February 16, 2011
    5 out of 5 stars

    I have had this Scan Gauge for over three years now and I use it in my Dodge diesel, Honda CR-V and Jeep Commander. It is simple t

    Fits The Bill

    by Fred Campbell – February 15, 2013
    5 out of 5 stars

    I've had my Scangauge ll for about two years. I purchased it to fill in the factory lack of essential gauges. I have an older Ford

    by Anonymous – December 01, 2015
    The ScanGaugeII can track transmission temperature through the programmable X-Gauge feature, but only if the vehicle is equipped to do so in the first place. Not all gasoline vehicles have sensors to track transmission temperature or transmission fluid. X-Gauge programmable commands can be viewed here.
    by Camping World – December 09, 2015
    by Anonymous – June 12, 2015
    Most likely yes. Check with your Owner's Manual for mention/location of your OBDII port as that is were the ScanGauge will connect.
    by Camping World – June 12, 2015
    Yes, as long as you have the OBDII port under your dash.
    by Camping World – September 29, 2015

    Related Items

    You May Also Like