Smart Solutions Rock Solid Tow Guard for Trucks, 14" x 34", 2 pieces
Item No. 6630
Smart Solutions Rock Solid Tow Guard for Trucks, 14" x 34", 2 pieces is rated
out of
5 by
5.
Images
Details
https://www.campingworld.com/smart-solutions-rock-solid-tow-guard-for-trucks-14-x-34-2-pieces-6630.html
Smart Solutions Rock Solid Tow Guard for Trucks, 14" x 34", 2 pieces
$129.99
$144.99
Save $15.00
(
10% Off
)
Additional Information
Features
The Rock Solid Tow Guard is the effective way to reduce the costly damage that road debris can cause to your towed vehicle. Rock Solid Guards are made of exhaust heat resistant rubber. This new material is 3/8" thick vulcanized molded rubber that is impervious to extreme exhaust heat and won't melt or deform. The Rock Solid design allows air to flow through the vented flaps to allow flexibility and prevent heat build-up, but it's sturdy enough to stop rocks or small road debris. These Rock Solid Guards install on the hitch insert of most 2" and 2-1/2" receiver hitches and can be easily taken on and off. All mounting hardware is included.
This Rock Solid Protective Guard consists of two 14"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
Show moreShow less
This Rock Solid Protective Guard consists of two 14"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
- New exhaust heat resistant rubber material
- Protects towed vehicles from road debris
- Vented flaps allow flexibility and prevent heat build-up
- Easily installed on the hitch insert of most 2" and 2-1/2" receiver hitches
- Two 14"H x 34"L pieces
Specs
| Unit Weight | 22.05 lb |
|---|---|
| Brand | Smart Solutions |
| MFG Part No. | 00011 |
Reviews
Q & A
The Rock Solid Tow Guard is the effective way to reduce the costly damage that road debris can cause to your towed vehicle. Rock Solid Guards are made of exhaust heat resistant rubber. This new material is 3/8" thick vulcanized molded rubber that is impervious to extreme exhaust heat and won't melt or deform. The Rock Solid design allows air to flow through the vented flaps to allow flexibility and prevent heat build-up, but it's sturdy enough to stop rocks or small road debris. These Rock Solid Guards install on the hitch insert of most 2" and 2-1/2" receiver hitches and can be easily taken on and off. All mounting hardware is included.
This Rock Solid Protective Guard consists of two 14"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
Show moreShow less
This Rock Solid Protective Guard consists of two 14"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
- New exhaust heat resistant rubber material
- Protects towed vehicles from road debris
- Vented flaps allow flexibility and prevent heat build-up
- Easily installed on the hitch insert of most 2" and 2-1/2" receiver hitches
- Two 14"H x 34"L pieces
| Unit Weight | 22.05 lb |
|---|---|
| Brand | Smart Solutions |
| MFG Part No. | 00011 |
Rated 3 out of
5
by
Mark from
Does not work well with a new Chevy Duramax 2011
If you own a new Chevrolet Duramax, I would not recommend this product. Chevrolet designed the exhaust system to exit out of the right rear corner of the truck. This causes the exhaust to hit the Rock Solid deflector. The exhaust on the new Chevrolet Duramax Diesel is hot enough to melt the material used to make the Rock Solid deflector. I melted
off one of the flaps and caused another flap to distort due to the heat of the exhaust. This Rock Solid deflector worked great on the Chevrolet Avalanche I owned prior.
Date published: 2010-10-10
Rated 1 out of
5
by
Taxjack from
Just buy two mudflaps and make your own.
Got on sale but still too much(my fault) think could have made it for about 40. Had to modify so make it stronger anyway.
Date published: 2020-07-07
Rated 2 out of
5
by
Coach24 from
Goofy thinking
My wife got it for me for Cmass,the instructions where connected to the tape of the box so they tore,the bracket that holds over receiver hitch was missing,instructions said run bolts through pre drilled holes only one section of rubber Matt was drilled through
Date published: 2020-04-12
Rated 4 out of
5
by
Anonymous from
Fits as advertised
Attaches to the hitch receiver. Bar can bend or twist but works well.
Date published: 2019-08-25
Rated 5 out of
5
by
Jsteeves from
5/5 great product and super easy to put together
Great product. Easy setup and easy install. Recommend
Date published: 2019-07-20
does this mount to the hitch. can it be removed easily to use on multiple trucks
Yes, this Rock Solid clamps on to a 2" hitch or hitch insert. It can be moved from vehicle to vehicle since it is not a permanent installation.
RockSolid Installation Instructions:
http://www.smartsolrv.com/uploads/2/4/5/0/24504404/rock_solid_rubber_pick_up_11____instructions.pdf
Date published: 2019-07-02
I need a total of 72" x 16" these are 18" each not enough to cover back of truck
This kit contains two panels that measure 34"W x 14"H.
See SKU#42253 for the kit with two 34"W x 18"H panels.
The Rock Solid Guard also comes in a motorhome version of 48" x 20"(SKU#1223) and 48" x 16"(SKU#19174),
If none of these fulfill your needs, then you will need to look at a rock guard product from a different manufacturer.
Date published: 2019-04-22
Which dually guard fits a 2009 jeep grand Cherokee
SKU#6630 is universal in nature and fits both Trucks and SUVs.
The primary fit requirement is a 2" hitch insert for the included bracket to mount to.
The Truck/SUV Rock Solid is available in two heights, 18"(SKU# 42253) or 14"(SKU# 6630). It is recommended that the vehicle owner measure from the bumper to the ground and subtract 4" to determine Rock Solid height for best fit.
Rock Solid for Truck/SUV Installation Instructions:
http://www.smartsolrv.com/uploads/2/4/5/0/24504404/rock_solid_rubber_pick_up_11____instructions.pdf
Date published: 2019-04-22
Where can I get one for my 2013 Silverado
Where canI get one for my 2013 truck
The 'Rock Solid' line is universal in when it comes to truck make/model.
Date published: 2019-03-08
How does this mount?
It mounts to the rear bumper.
Date published: 2019-03-08
Are these mudflaps rubber?
Are these mudflaps rubber?
They are durable, lightweight rubber blend strips.
Date published: 2019-03-08
Is this price per shield or for the pair?
Includes two sections and installation hardware.
Date published: 2019-03-08