TireMinder TM-77 Tire Pressure Monitoring System with 4 Transmitters for RVs, Motorhomes, 5th Wheels, Motor Coaches, and Trailers

Catalog Item # 86610 Members Only Special

The New TireMinder TM-77-4 Tire Pressure Monitoring System features updated software and a large display to make monitoring your RV, Motorhome, 5th Wheel, Motor Coach, or Trailer easier than ever.

Large, crystal-clear 3.25” display Monitors up to 22 tires (0 to 232 PSI) Visual, audible, and blow-out alarms Checks for tire issues every 6 seconds Low-/high-pressure and high-temp alerts

Watch the video below to know why the TM-77 is the best TPMS for your RV!

System Features:

  • Large, crystal-clear 3.25" display
  • Monitors up to 22 tires (0 to 232 PSI); extra transmitters sold separately.
  • Simultaneous pressure and temperature readings
  • Automatically scrolls through each tire position with the push of a button
  • Multi-Vehicle Disconnect (MVD) allows for up to 3 separate vehicles to be added and exchanged in just a few clicks
  • Upgrade High Power Antenna
  • Visual and audible alarms
  • Blow-out alarms
  • Signal booster included for optimal signal strength
  • Transmitters check for tire issues every 6 seconds
  • Transmitters send updated pressure and temperature readings every 4 minutes (if no issue found)
  • Fast and slow leak alerts (3 PSI or more in 2 minutes or less and 6 PSI or more in 10 minutes or less)
  • Low- and high-pressure alerts (15% below baseline and 20% above baseline)
  • High-temperature alert (alerts at 167° F)
  • Replaceable CR1632 batteries
  • Rechargeable monitor with battery indicator
  • Single-action memory delete
  • Auto-Search function allows the TM-77 to receive updated pressure and temperature readings at a push of a button
  • Rapid Connect
  • Lightweight 0.5-oz. transmitters
  • Free Manufacturer Battery Replacement through 2022
  • Free Battery Exchange Program - For more information, click here.
  • Award-winning customer support

    Kit Includes:

  • 1 TireMinder TM-77 Monitor
  • 4 TireMinder Brass Transmitters (for use with brass or steel valve stems)
  • 1 Hard-Wired Signal Booster with Alligator Clips
  • 8 CR1632 Batteries
  • 1 Mounting Bracket
  • 1 Micro USB Cable and DC Charger
  • 4 Locking Nuts
  • 1 Wrench with Valve Core Tool
  • 4 Additional O-Rings

  • Technical Specifications

    1.9 lbs.

    Camper's Choice Rating

    Reviewer rating of 4 stars based on 4 reviews (4 Based on 4 Reviews)

    Add A Review

    Pros
    • Easy to install (4)
    • Excellent detailed printed manual (1)
    • Not durable (1)
    • Quality (1)
    • Reasonable (1)
    Cons
    • Not accurate (1)
    • Tire inducers are intermittent (1)

    TM77

    by Doug Perkins – April 30, 2017
    4 out of 5 stars

    I just received and installed this unit on my 5th wheel. First the good before the negative. It came as advertised in the video. I

    Initial issues followed by good service from tire minder

    by David Wettlaufer – October 07, 2016
    5 out of 5 stars

    I purchased this system in early July 2016 from the Houghton Lake MI store and headed on out west to Vancouver Island, then back t

    Failed to perform

    by Combs' camping adventures – September 11, 2017
    1 out of 5 stars

    I wanted to monitor tires on my travel trailer. This product failed after about 6 hours on the road. It alerted to Rapid Leak on o

    Great Product

    by Lori Denton – November 06, 2018
    5 out of 5 stars

    I purchased this before we got on the road full time. My husband wasn't sure we NEEDED it. After only one day on the road it told

    Per the manufacturer: "Transmitters may be used on rubber valve stems. We highly recommend the brass or stainless steel.

    Rubber valve stems can be an issue, based on the Age, length and physical location (i.e. exposure to road salt, high heat, sun, etc), so be sure to check the condition of you rubber valve stems on a regular basis."
    by Camping World – March 28, 2017

    The screen shows all tires programmed by me but does not scan unless I press the top button. Is this the way it works?
    The monitor and sensors communicate every 6 seconds, but regular pressures and temperatures are updated on the monitor every 4 minutes if a change has occurred. Should a significant abnormality occur, the monitor will react within 6 seconds. This process helps extend battery life on the sensors and monitor.
    by Camping World – July 22, 2016

    Related Items

    You May Also Like