Additional Information
Features
Speed up raising and lowering scissor jacks on trailers.
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack faster than other jacks. Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks. Hex socket measures 3/4". 2-Piece construction.
Show moreShow less
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack faster than other jacks. Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks. Hex socket measures 3/4". 2-Piece construction.
- Eliminates manual cranking
- Works up to 10 times faster than hand cranking
- Easy operation with a powered drill that uses 3/8" drill bits
- Zinc-plated steel is durable and corrosion resistant
- Non-slip shank
Specs
Frame Material | Steel |
---|---|
Jack Type | Power/Automatic |
Unit Weight | 0.20 lb |
Brand | Ultra-Fab |
MFG Part No. | 48-979005 |
Reviews
Q & A
Speed up raising and lowering scissor jacks on trailers.
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack faster than other jacks. Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks. Hex socket measures 3/4". 2-Piece construction.
Show moreShow less
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack faster than other jacks. Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks. Hex socket measures 3/4". 2-Piece construction.
- Eliminates manual cranking
- Works up to 10 times faster than hand cranking
- Easy operation with a powered drill that uses 3/8" drill bits
- Zinc-plated steel is durable and corrosion resistant
- Non-slip shank
Frame Material | Steel |
---|---|
Jack Type | Power/Automatic |
Unit Weight | 0.20 lb |
Brand | Ultra-Fab |
MFG Part No. | 48-979005 |
Rated 5 out of
5
by
Paul Brindel from
Ultra Speed Socket Makes It So Easy
I have a bum shoulder and turning a crank hurts. When I added the
Ultra Speed Socket to my battery powered hand screwdriver it turned
the leveling jacks like a charm. No more hand cranking for me. It took
no time at all to lower and raise my leveling jacks. I had no trouble
leveling my trailer. I bought two just in case I lose one.
Date published: 2008-07-07
Rated 4 out of
5
by
Earl Robinson from
Works as advertised
Did what it was asked to do. Very fast. Only concern is the jack lead screw vibrates and shakes the jack if you use full speed. Going slower seems to elimate the problem.
Date published: 2012-04-01
Rated 5 out of
5
by
Edmund Laing from
ultra speed socket
I love the ease of seting and raising of staberizor jacks wuing the ultra speed socket and my 18 volt hand drill motor. Definately easier than using the hand crank.
Date published: 2013-04-06
Rated 5 out of
5
by
Lisa M from
Handy dandy!
Very handy tool. Makes cranking up/down very quick and easy. Found I still needed my hand crank when I needed just a little extra ummph in stabilizing. Love it!
Date published: 2012-08-29
Rated 5 out of
5
by
David Johnson from
Speed Socket
Makes lowering and raising the stabilizing jacks on my travel trailer a lot easier and
quicker. Glad I purchased this socket.
Date published: 2013-04-02
Rated 4 out of
5
by
Cathy Nytroe from
works nicely
As hubby and I are getting up there in years, he was excited that this would alleviate the
hand cranking. Works very nicely.
Date published: 2014-05-14
Rated 5 out of
5
by
Gunner's Dad from
Saves time and my back!
Saves a lot of time and a lot of bending. Stabilizers are in place in seconds. I will never
use a crank again.
Date published: 2014-07-18
Rated 5 out of
5
by
Oregon Camper from
Good Tool
This works well a bit pricy in my book but really I would buy one again because it is quick and easy.
Date published: 2012-08-30
Can this socket be used on manual stabilizers that are not the scissor type?
Yes if the socket is the same size/type; Hex socket 3/4".
Date published: 2019-03-08