Additional Information
Features
The Valterra Flush-Mount Water Inlet comes with a check valve, a garden hose swivel fitting with gripper, a press-in dust plug, plus installation tape and hardware. Conforms with federal and state laws for drinking water fixtures. 2-3/4" die-cast flange. 1/2" MPT inside connection.
• Easy press-in dust plug
• Installation tape and hardware
• Swivel connection with gripper
• 2-3/4" flange
• 1/2" MPT inside connection
Show moreShow less
• Easy press-in dust plug
• Installation tape and hardware
• Swivel connection with gripper
• 2-3/4" flange
• 1/2" MPT inside connection
- Swivel connection with gripper
- Press-in dust plug
- Installation tape and hardware included
- 1/2" MPT inside connection
Specs
Unit Weight | 0.31 lb |
---|---|
Brand | Valterra |
MFG Part No. | A01-0165VP |
Reviews
Q & A
The Valterra Flush-Mount Water Inlet comes with a check valve, a garden hose swivel fitting with gripper, a press-in dust plug, plus installation tape and hardware. Conforms with federal and state laws for drinking water fixtures. 2-3/4" die-cast flange. 1/2" MPT inside connection.
• Easy press-in dust plug
• Installation tape and hardware
• Swivel connection with gripper
• 2-3/4" flange
• 1/2" MPT inside connection
Show moreShow less
• Easy press-in dust plug
• Installation tape and hardware
• Swivel connection with gripper
• 2-3/4" flange
• 1/2" MPT inside connection
- Swivel connection with gripper
- Press-in dust plug
- Installation tape and hardware included
- 1/2" MPT inside connection
Unit Weight | 0.31 lb |
---|---|
Brand | Valterra |
MFG Part No. | A01-0165VP |
Rated 4 out of
5
by
Jim P from
Inexpensive replacement
Very easy to install. Had to drill new pilot holes since they did not line up with the old inlet. Comes with everything you need to install. only reason I did not rate as a 5 is that the fitting is plastic instead of brass. That being said, it seems like it will hold up just fine.
Date published: 2020-05-14