Valterra Lead-Free Brass Standard Water Regulator
Item No. 49509
Valterra Lead-Free Brass Standard Water Regulator is rated
out of
5 by
13.
Details
https://www.campingworld.com/valterra-lead-free-brass-standard-water-regulator-49509.html
Valterra Lead-Free Brass Standard Water Regulator
$13.98
$16.99
Save $3.01
(
18% Off
)
Additional Information
Features
Lead-free water pressure regulator reduces water pressure to a safe 40-50 psi pressure. This regulator protects hoses and equipment and includes an easy-to-use gripper and screened washer. Does not come with gauge or cap. Fits all standard water hose and campground water risers. Durable brass construction will resist corrosion. Limited one-year warranty.
• End Size 1: 3/4"
• End Type 1: Female Swivel
• End Size 2: 1/2"
• End Type 2: Male Threads
• Complies With CA/VT Regulations: Yes
• Built-In Check Valve: No
Show moreShow less
• End Size 1: 3/4"
• End Type 1: Female Swivel
• End Size 2: 1/2"
• End Type 2: Male Threads
• Complies With CA/VT Regulations: Yes
• Built-In Check Valve: No
- Regulator keeps water pressure between 40-50 psi
- Protects hoses and equipment
- Includes easy-to-use gripper and washer
- Durable brass construction resists corrosion
Specs
Unit Weight | 0.40 lb |
---|---|
Brand | Valterra |
MFG Part No. | A01-1120VP |

WARNING: This product can expose you to chemicals including Lead and Lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
Lead-free water pressure regulator reduces water pressure to a safe 40-50 psi pressure. This regulator protects hoses and equipment and includes an easy-to-use gripper and screened washer. Does not come with gauge or cap. Fits all standard water hose and campground water risers. Durable brass construction will resist corrosion. Limited one-year warranty.
• End Size 1: 3/4"
• End Type 1: Female Swivel
• End Size 2: 1/2"
• End Type 2: Male Threads
• Complies With CA/VT Regulations: Yes
• Built-In Check Valve: No
Show moreShow less
• End Size 1: 3/4"
• End Type 1: Female Swivel
• End Size 2: 1/2"
• End Type 2: Male Threads
• Complies With CA/VT Regulations: Yes
• Built-In Check Valve: No
- Regulator keeps water pressure between 40-50 psi
- Protects hoses and equipment
- Includes easy-to-use gripper and washer
- Durable brass construction resists corrosion
Unit Weight | 0.40 lb |
---|---|
Brand | Valterra |
MFG Part No. | A01-1120VP |

WARNING: This product can expose you to chemicals including Lead and Lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov/product.
Rated 3 out of
5
by
Brenda Williams from
Presure Regulator
These little water pressure regulators work as stated but severely limit the water flow volume. Getting enough water volume to take a shower is almost impossible. These pressure regulators work great at keeping the PRESSURE at 45psi but are NOT so good at allowing enough VOLUME of water to pass.
Date published: 2015-04-21
Rated 5 out of
5
by
Robert Northrup from
Really need it
Took rig out this past week and blew the check-valve on the water heater inlet. So now have old one and a new check-valve on water heater inlet. I should of had one at the city water conn, so let this be a lesson for doubters that think you don't need one!
Date published: 2016-05-31
Rated 5 out of
5
by
David Johnson from
Water regulator
My old water regulator lost the screen so I needed a new one. This one works great and protects the plumbing in my travel trailer from high water pressure. Would not us a city water hook up with out a water regulator like this.
Date published: 2013-04-02
Rated 5 out of
5
by
Donald McNulty from
Standard Water Regulator
This device is easy to install, as it just screws on to the
water supply outlet, then your water supply hose screws into
it. It reduces the usual 100+ pounds of city water pressure
to an RV-safe 45 pounds of pressure.
Date published: 2014-05-04
Rated 5 out of
5
by
James Wright from
so easy
This unit is a 10 second install. Screw it on to water inlet and then screw water hose onto
the regulator. Hand grip helps so you can do all this with wet hands.
Date published: 2014-07-16
Rated 4 out of
5
by
Todd from
No problems yet
Bought this for preventive measures. So far so good. I haven't blown any hoses or water
lines so I assume it's working.
Date published: 2013-11-21
Rated 5 out of
5
by
ShMorris from
Pressure regulator
Works exactly as intended. Easy to use. Brass should be more durable than the ‘plastic’ regulators.
Date published: 2020-07-03
Rated 5 out of
5
by
Larry M from
Great value
Great value works great no leaks.
Date published: 2012-08-29
Does this come in 5/8 “ size ?
Unfortunately not
Date published: 2020-05-05
In what country is it manufactured?
These are made in China.
Date published: 2019-03-08
Is it best to attach regulator to unit or campground water outlet?
Regulators should be connected to the water source.
Date published: 2019-03-08
It appears to be 3/4 male fitting, does it by chance have 1/2 female?
According to Valterra, both ends are the same size as standard water hose fittings (only difference being male/female fitting).
Date published: 2019-03-08