Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V image number 1
Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V image number 2
Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V image number 3
NEW
1/3
Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V image number 1
Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V image number 2
Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V image number 3

Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V

5 out of 5 Customer Rating Write a review | Ask a Question
Item #: 149933
$548
Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V
Victron Energy Phoenix Charger, 12/30 (2+1) 120-240V
$548
Shipping
Delivery time calculated in checkout Delivery time calculated in checkout
Next Day Delivery
Not Available
  • Ships from vendor
Additional shipping charges may apply.

Ships from Vendor

In-Store Only

Free Standard Shipping

This item is excluded from all discounts and promotions.

Minimum order quantity of 1
Maximum order quantity of 100
Must purchase in increments of 1

Return Policy

We believe in offering the very best value, quality, and selection. Plus, we want you to enjoy your purchase! In the event you wish to send a product back to us, you may return most unused items for a refund or exchange, minus shipping, within 90 days from the date of purchase unless noted below under exceptions and exclusions. Refunds are issued to the original form of payment, unless returned in store where some exclusions may apply.

Features
The Victron Energy Phoenix Charger features a microprocessor-controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimize the charge process relative to the way the battery is being used. Adaptive 4-stage charge characteristics – bulk, absorption, float, and storage. Features two full rated outputs and one 4-amp output. Universal input: 90-265V, 50/60Hz.

Variable Absorption Time
When only shallow discharges occur (a yacht connected to shore power for example), the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.

BatterySafe Mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.

Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2.2 V/cell (13.2V for 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to 'equalize' the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Temperature Compensation
Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.

Battery Voltage Sense
In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.

Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)
The chargers will accept a 90-400V DC supply.

Computer Interface
Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port allowing all parameters of the charger to be customized.
  • Microprocessor-controlled adaptive battery management system
  • Can be pre-set to suit different types of batteries
  • Adaptive 4-stage charge characteristics – bulk, absorption, float, and storage
  • Two full rated outputs and one 4-amp output
  • BatterySafe Mode prevents damage by limiting the rate of voltage increase
Specs
Unit Weight
7.94 lb
Brand
Expion360
MFG Part No.
PCH012030001
WARNING: This product can expose you to chemicals including CHEMICALS-B, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov/product.
Reviews