Victron Energy Phoenix Smart IP43 Charger 12/30 (1+1) 120-240V image number 1

Victron Energy Phoenix Smart IP43 Charger 12/30 (1+1) 120-240V

4.7 out of 5 Customer Rating Write a review | Ask a Question
Item #: 149950
Victron Energy Phoenix Smart IP43 Charger 12/30 (1+1) 120-240V
Victron Energy Phoenix Smart IP43 Charger 12/30 (1+1) 120-240V
Delivery time calculated in checkout Delivery time calculated in checkout
Next Day Delivery
Not Available
  • Ships from vendor
Additional shipping charges may apply.

Ships from Vendor

In-Store Only

Free Standard Shipping

This item is excluded from all discounts and promotions.

Minimum order quantity of 1
Maximum order quantity of 100
Must purchase in increments of 1

Return Policy

We believe in offering the very best value, quality, and selection. Plus, we want you to enjoy your purchase! In the event you wish to send a product back to us, you may return most unused items for a refund or exchange, minus shipping, within 90 days from the date of purchase unless noted below under exceptions and exclusions. Refunds are issued to the original form of payment, unless returned in store where some exclusions may apply.

With boat owners in mind, this Victron Energy Phoenix Smart IP43 Charger 1+1 Model is an adaptive 5-step 30A charger that provides 3A to the starter-battery, the rest to the 'house' bank. With adaptive, intelligent, dynamic charge, this Bluetooth-enabled charger lets you monitor the charger and set alarms straight from your phone.

Bluetooth Smart Built-In
The wireless solution to set-up, monitor, control, update, and synchronize Smart IP43 Chargers.

Smart IP43 1+1 Charger
Two outputs to charge 2 battery banks. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.

Automatic Voltage Compensation
The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases.

Adaptive 6-Stage Charge
Bulk, absorption, recondition, float, storage, refresh. The Smart IP43 Charger features the well-known "adaptive" battery management system that can be preset to suit different types of batteries. The adaptive feature will automatically optimize the charge process relative to the way the battery is being used.

Variable Absorption Time
When only shallow discharges occur (a yacht connected to shore power for example), the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.

BatterySafe Mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.

Storage Mode
The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to 'equalize' the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
  • Adaptive 5-step 30A charger provides 3A to starter battery and rest to "house" bank
  • Bluetooth-enabled to let you monitor charger and set alarms from your phone
  • Automatic voltage compensation if voltage drops over DC cabling
  • Variable absorption time helps prevent overcharging of battery
  • BatterySafe mode and Storage mode
Unit Weight
8.16 lb
MFG Part No.
WARNING: This product can expose you to chemicals including CHEMICALS-B, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information, go to