Weaver Scope Top Mount Aluminum Base

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• One Piece Only of 2-Piece Base
• Matte Finish

FITS THE FOLLOWING FIREARM MODELS
Anschutz
• 1568 (Fits Rear)

CIL
• 950 / 950-C (Fits Rear)

Ithaca
• LSA-55 / LSA-65 (Fits Front & Rear)

Modern Muzzleloading
• Knight MK-85 (Fits Front & Rear)
• BK-92 (Fits Front & Rear)
• T-Bolt (Flat Receivers) (Fits Front & Rear)

Sako
• Whitetail Hunter (Fits Front & Rear)

Savage (Fits Rear)
• 10/12/16 (Short Actions)
• Striker Pistol
• 510/512/516 (Short Actions)
• 10 Muzzleloader (Pre 2003 Models)
• 110/112/116 (Long Actions)
• 210 Shooting (Pre 2003 Models) (Use Extra High Rings)

Shilen
• Flat Top Receiver (Fits Front & Rear)

Stevens
• 110E (Fits Rear)

Tikka
• With Flat Receiver (Fits Front & Rear)

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 429M
• One-Piece Base
• Matte Finish

FITS THE FOLLOWING FIREARM MODELS
Remington
• 870 (12-Ga. Only)

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 92A
• One-Piece Mount
• Matte Finish

FITS THE FOLLOWING FIREARM MODELS
Thompson Center
• Contender
• G2 (Handgun and Carbine Rifle)

Rossi*
• .410 / .22LR
• .410 / .17HMR Small Frame Matched Pair Combo Only

* Base DOES NOT FIT Rossi Large Frame Matched Pair Combos (all models with 12-ga. or 20-ga. shotgun barrels).

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 24
• Front Piece Only
• Gloss Finish

FITS THE FOLLOWING FIREARM MODELS
ZB
• 22 Hornet
• 218 Bee

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 61
• One Piece Only of 2-Piece Base
• Gloss Black Finish

FITS THE FOLLOWING FIREARM MODELS
Anschutz
• 1568 (Fits Rear)

CIL
• 950 / 950-C (Fits Rear)

Ithaca
• LSA-55 / LSA-65 (Fits Front & Rear)

Modern Muzzleloading
• Knight MK-85 (Fits Front & Rear)
• BK-92 (Fits Front & Rear)
• T-Bolt (Flat Receivers) (Fits Front & Rear)

Sako
• Whitetail Hunter (Fits Front & Rear)

Savage (Fits Rear)
• 10/12/16 (Short Actions)
• Striker Pistol
• 510/512/516 (Short Actions)
• 10 Muzzleloader (Pre 2003 Models)
• 110/112/116 (Long Actions)
• 210 Shooting (Pre 2003 Models) (Use Extra High Rings)

Shilen
• Flat Top Receiver (Fits Front & Rear)

Stevens
• 110E (Fits Rear)

Tikka
• With Flat Receiver (Fits Front & Rear)

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 63BS
• One-Piece Mount
• Silver Finish

FITS THE FOLLOWING FIREARM MODELS
Marlin
• 45
• 30AS
• 336
• 444
• 1894
• 1895
• Camp 9
• 308
• 338

Mossberg
• 640

Western Field
• 740

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 46
• Front Piece Only
• Gloss Finish

FITS THE FOLLOWING FIREARM MODELS
Anschutz
• 1568

Beretta
• Mato Rifle

Browning
• Bolt Action BBR, Hi-Power, and other calibers (older models)
• BBR (Bolt Action), Long & Short Actions

CIL
• 950 / 950-C
• 972-C

Colt
• 57

Cooey
• 71

H & R
• 300/301/330/370 (Before 1973)
• 300 & 301 LA in 270, 30-06, 7mm, and 300 Win (1973 and later)

Herters
• J9

High-Standard
• High-Power

Marlin
• 455
• MR7

Mauser
• Receiver Ring About 1.410" Dia. (98FN)*
• Receiver Ring About 1.300" Dia. (Swedish 96)*
• Bauer 3000 & 4000

Musgrave
• Mark I, II, III, and IV

Parker-Hale
• 1000 / 1000C
• 1100
• 1200
• 1700

Savage
• 10/12/16 (Short Actions)
• Striker Pistol
• 510/512/516 S/A
• 110/112/116 (Long Actions)
• 210 Shooting before 2003 (use extra-high rings)
• 10/12/110/112 (All Long Action AccuTrigger) (Fits Front and Rear)
• Axis Series (Fits Front and Rear)
• 10/12/110/112 (All Short Action AccuTrigger) (Fits Front and Rear)
• 10 ML II (Fits Front and Rear)

Sears
• 50/51/51L/53

Stevens
• 110E
• Savage/Stevens 200 (Fits Front and Rear)

Voere
• 2150
• 2165/1, 2165/2, 2165/3, 2165/4 (Mauser Action)

Weatherby
• FN Mauser Style Actions

Winchester
• 52 (Hole Spacing The Same) (Fits Front and Rear)
• 54
• Early Model 70 w/Serial No. below #66350 (May require bolt and/or safety alteration. Consult with a qualified gunsmith.)
• 70 Long Action
• 70 Super Express
• 70 Short Action (1984 and later)
• 670
• 770
• 70 WSSM
• 70 WSM

* Shimming is probably required for perfect alignment.

Keep your scope mounted firmly to your firearm with the Weaver Top-Mount Extension Scope Base #402. Each Weaver base is machined to the tightest tolerances for a custom fit. They are designed to fight the effects of recoil with a square-cut notch that precisely mates to the sturdy cross bolt in every Weaver detachable ring. Includes all necessary mounting hardware.

Fits the following firearms:
• Cooey 71
• Einfield (Cut like Winchester 70)
• H&R Models 300, 301, 330, & 370 before 1973; 300, 301 LA Post 1973 (270, 30-06, 7mm, 300 Winchester)
• Herters J9
• High-Standard High-Power
• Interarms Viscount
• Marlin Models 455 & MR7
• Mauser Model 98FN, Swedish 96, and Bauer 3000 & 4000
• Musgrave Models Mark I-IV
• Navy Arms Country Boy Muzzle Loader
• Parker-Hale Models 1000, 1000C, 1100, 1200, & 1700
• Savage Models 10, 12, 16, 510, 512, & 516 Short Action Rifle, 110 (E & S), 111, 112 (R, V, & FV), 116 FSS (Long Actions); 210 Shotgun - use X-high rings; Striker Pistol
• Schultz & Larsen
• Sears Models 50, 51, 51L, & 53

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 47M
• Rear Piece Only
• Matte Finish

FITS THE FOLLOWING FIREARM MODELS
Browning
• A-Bolt / A-Bolt 22 Stalker (Fits Front & Rear)
• Medallion (Fits Front & Rear)
• BBR Bolt Action (Long & Short Actions) (Rear Only)

Cooey
• 71

Enfield
• With Receiver Cut Down Like Winchester 70

Marlin
• MR7

Sears
• 53

Winchester
• 70 Long Action (hole spacing same)
• 670
• 770
• 70 Short Action (1984 and later)
• 70 WSM

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 35M
• Front Piece Only
• Matte Finish

FITS THE FOLLOWING FIREARM MODELS
BSA*
• Monarch Medium Action in 222, 243, & 308
• CF2
• Monarch Long Action in 7mm, 270, & 30-06

Churchill
• Highlander

Colt
• Sauer (Fits Front & Rear)

Enfield
• With Receiver Cut Down Like Remington 721

H & R
• 317
• 322

Herters
• U9 Round Receiver

Interarms (Rossi, Stoeger)
• Howa

Mossberg
• 1500
• 1700

Raptor Arms
• Same as Remington 700 Long Action

Remington
• 700 Long Action
• 78 Long Action
• 40X-L Long Action
• 721 Long Action
• 725 Long Action
• 700 Short Action*
• 78 Short Action*
• 40X-S Short Action*
• 722 Short Action*
• 725 Short Action*
• 700 Muzzleloader*
• 7 with 4 holes (new in 1999)
• 673

Ruger
• M77 (Round Top Drilled)

Sauer
• 200 (Fits Front & Rear)

Shilen
• Round Receiver (Fits Front & Rear)

Smith & Wesson
• 1500
• 1600
• 1700

Weatherby
• Vanguard**
• Mark V Magnum Calibers except .240 mag

* Multi-Slot Front Base
** Shimming is probably required for perfect alignment. Extension or one-piece base may be needed for shorter scopes.

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 47
• Rear Piece Only
• Gloss Finish

FITS THE FOLLOWING FIREARM MODELS
Browning
• A-Bolt / A-Bolt 22 Stalker (Fits Front & Rear)
• Medallion (Fits Front & Rear)
• BBR Bolt Action (Long & Short Actions) (Rear Only)

Cooey
• 71

Enfield
• With Receiver Cut Down Like Winchester 70

Marlin
• MR7

Sears
• 53

Winchester
• 70 Long Action (hole spacing same)
• 670
• 770
• 70 Short Action (1984 and later)
• 70 WSM

Feel confident that your scope is securely fastened to your firearm with the Weaver Top Mount Aluminum Base. Each Weaver Base is machined to tight tolerances for a custom fit. The base offers maximum strength for the rings to hold tightly and handle any recoil. Mounting hardware included.

• Weaver Top Mount Base
• Reference Number 45
• Rear Piece Only
• Gloss Finish

FITS THE FOLLOWING FIREARM MODELS
Browning
• Bolt Action BBR, Hi-Power, and other calibers (older models)

CIL
• 972-C

Colt
• 57

H & R
• 300/301/330/370 (Before 1973)

Herters
• J9

Marlin
• 455

Mauser
• Receiver Ring About 1.410" Dia. (98FN)*

Musgrave
• Mark III and IV

Parker-Hale
• 1000 / 1000C
• 1100
• 1200
• 1700

Sears
• 50/51

Springfield
• O3-A3** (Fits Front)

Voere
• 2150
• 2165/1, 2165/2, 2165/3, 2165/4 (Mauser Action)

Weatherby
• FN Mauser Style Actions

* Shimming is probably required for perfect alignment.
** Remove rear sight to use.